1. Manuals
  2. Brands
  3. Acura Embedded Systems Manuals
  4. Touch Panel
  5. AcuPanel 12
  6. User manual

Acura Embedded Systems AcuPanel 12 User Manual

Hide thumbs Also See for AcuPanel 12:
Table of Contents

Advertisement

Quick Links

Download this manual
AcuPanel 12
User Manual
AcuPanel 12
User Manual
Version 1.0
1

Advertisement

Table of Contents
loading

Related Manuals for Acura Embedded Systems AcuPanel 12

Summary of Contents for Acura Embedded Systems AcuPanel 12

  • Page 1 AcuPanel 12 User Manual AcuPanel 12 User Manual Version 1.0...
  • Page 2 All Rights Reserved - Printed in Acura Embedded Systems Inc Disclaimer Acura Embedded Systems Inc shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from using this material, or the performance or use of this product.
  • Page 3 AcuPanel 12 User Manual Microsoft, Windows XP, Windows Vista, Windows 7, and Windows Sound System are trademarks of Microsoft Corporation. Intel ®, Intel ® Atom™, Intel ® HD Audio (Azalia) are registered trademark of Intel Corporation. Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology.
  • Page 4 AcuPanel 12 User Manual FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
  • Page 5 AcuPanel 12 User Manual Regulatory information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to...
  • Page 6 AcuPanel 12 User Manual General Guideline 1. Read all of these instructions. 2. Save these instructions for future use. 3. Follow all warnings and instructions marked in the system. 4. Except as explained elsewhere in this Manual, do not attempt to service the computer yourself.

  • Page 7: Safety Instructions

    AcuPanel 12 User Manual Safety instructions 1. Please read these safety instructions carefully. 2. Please keep this User Manual for later reference. 3. Please disconnect this equipment from connecter before cleaning. Don’t use liquid or prayed detergent for cleaning. User moisture sheet or cloth for cleaning.
  • Page 8 AcuPanel 12 User Manual General Requirements The requirements listed below are applicable to all countries:  All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used.
  • Page 9 AcuPanel 12 User Manual INDEX ................Table of Contents ............Chapter 1 General Information 1.1. Introduction ..................12 1.2. Features ....................12 1.3. Specification ..................13 1.3.1. Technical Specification ..............13 1.3.2. DISPLAY ..................13 1.3.3. Touch Screen ................. 14 1.3.4. I/O Interface ................... 14 1.3.5.
  • Page 10 AcuPanel 12 User Manual 1.5. Panel Mounting Instruction ............18 1.5.1. Physical Dimensions ..............18 1.5.2. Assembling the panel PC .............20 1.5.3. Enclosed Parts ................21 1.6. Stand Installing Instruction ............22 1.6.1. Physical Dimensions ..............22 1.6.2. Stand Installation ................. 23 Chapter 2 System Setup ..............
  • Page 11 AcuPanel 12 User Manual Chapter 3 Using the Panel PC ............31 3.1 Introduction ..................31 3.2 Using the USB Mouse and Keyboard ..........31 3.3 Using the Serial Ports (COM) ............32 3.4 Using the USB Ports .................33 3.5 Using the LAN Port ................33 3.6.

  • Page 12: Chapter 1 General Information

    AcuPanel 12 User Manual Chapter 1 General Information General Information 1.1. Introduction ACUPANEL is an Intel® Celeron M 1.0G /512K or Intel® Atom N450 processor based Panel PC with a bright 10.4”/12.1" LCD display. The powerful Celeron M CPU with Intel® 915GME/910GMLE + ICH6M chipsets or Atom N450 CPU with ICH8M chipsets bring the most dynamic applications to life without sacrifices to any industrial reliability.

  • Page 13: Specification

    AcuPanel 12 User Manual 1.3. Specification The ACUPANEL is a flexible, multi-functional flat panel PC. With following specifications that can be applied in diverse operational environments and implemented in multi-faceted applications. 1.3.1. Technical Specification CPU: Embedded Intel® Celeron-M Processor 1.0GHz/512K +Chipset: Intel®...

  • Page 14: Touch Screen

    AcuPanel 12 User Manual 1.3.3. Touch Screen Touch Screen type: 5-wire Analog resistive type Light Transmission: 80% Durability (Touch lifetime): 35 million 1.3.4. I/O Interface Serial Port: 2 x Serial port (COM1:RS-232, COM2:RS-232/422/485 select by jumper) USB Port: 2 x USB 2.0 ports...

  • Page 15: Material

    AcuPanel 12 User Manual Humidity: 5% ~ 95% RH, (MIL STD 810G, Method 507.5 (Non-Operating) EMI/EMS: Meet the CE and FCC class B and VCCI regulation. Other function: Support USB device boot up (FDD,HDD,CD-ROM) IP: IP65 waterproof and dustproof (IEC 60529) RoHS: RoHS Compliant Vibration (MIL-STD-810G Method 514.6 Procedure I, Category 20, Fig...

  • Page 16: Wall Mounting Installation

    AcuPanel 12 User Manual 1.4. Wall Mounting Installation 1.4.1. Physical Dimensions Dimensions (units in mm) 1.4.2. Installation Process Masonry Walls or Cement Walls...

  • Page 17: Display Installation Process

    AcuPanel 12 User Manual Stud Walls 1.4.3. Display Installation Process Mount display brackets to the back of the display Install the Display onto the wall mount bracket...

  • Page 18: Enclosed Parts

    AcuPanel 12 User Manual 1.4.4. Enclosed Parts ITEM PARTS Please refer to PLUG 07 SCREW K SCREW SCREW SPEC 1.4.1 P3/16” P S W P S W 11/2” M4 L14 WARNGING The maximum display weight the Wall mount bracket ：...
  • Page 19 AcuPanel 12 User Manual Dimensions (units in mm)

  • Page 20: Assembling The Panel Pc

    AcuPanel 12 User Manual 1.5.2. Assembling the panel PC The procedure for assembling the panel PC is identified by following drawing. Please follow the instruction below for panel mounting.

  • Page 21: Enclosed Parts

    AcuPanel 12 User Manual 1.5.3. Enclosed Parts SPEC ITEM PARTS M6*1.0+15PF- RJ45, L=1.8M (Optional) DSUB, L=1.8M (Optional) USB, L=1.8M (Optional) DC Extension, L=1.8M...

  • Page 22: Stand Installing Instruction

    AcuPanel 12 User Manual 1.6. Stand Installing Instruction 1.6.1. Physical Dimensions Your panel PC is equipped with stand to fit your flexibility and necessity and let you execute your system comfortably. The following drawing shows you detailed information for the dimensions.

  • Page 23: Stand Installation

    AcuPanel 12 User Manual Dimensions (units in mm) 1.6.2. Stand Installation To install the stand into ACUPANEL System: 1. Align the hole on the stand to the hole on the rear side of ACUPANEL system.
  • Page 24 AcuPanel 12 User Manual 2. Then stick them by rotating and tightening the screws securely and firmly. After the stand is installed to the system, please find the dimension for different angles as listed below. (units in mm) Dimensions in Rear View...
  • Page 25 AcuPanel 12 User Manual Dimensions in Front View Dimensions in Side View Dimensions in Top View...

  • Page 26: Chapter 2 System Setup

    AcuPanel 12 User Manual Chapter 2 System Setup System Setup 2.1. Exploring Your Panel PC Before starting to set up the panel PC, take familiar with the locations and purposes of controls, drives, connectors and ports, which are illustrated in the figures below.

  • Page 27: Preparing For First-Time Use

    AcuPanel 12 User Manual USB Ports (x2) The Universal Serial Bus (USB) port allows you to connect USB 2.0-compliant devices (for example, printers, scanners and so on) to your Panel PC. COM1 Port Your Panel PC is fitted with a COM port to enable connection of a serial device such as a modem or mouse.
  • Page 28 AcuPanel 12 User Manual HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Remove all power from the device prior to installing or removing any accessories, hardware, or cables. Always use a properly rated voltage sensing device to confirm power is off.

  • Page 29: Connecting The Keyboard And Mouse

    AcuPanel 12 User Manual Failure to follow these instructions will result in death or serious injury. Connect the equipment to a properly grounded safety extra low voltage (SELV) with Limited Power Source (LPS). The power source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level.

  • Page 30: Installing System Software

    AcuPanel 12 User Manual 2.4. Installing System Software The operating system is the software foundation for your Panel PC. It is the platform for all your software application programs to run on. The most popular operating system today is Microsoft® Windows®. Your Panel PC comes with an operating system pre-installed and needs only to be setup and configured during initial use.

  • Page 31: Chapter 3 Using The Panel Pc

    AcuPanel 12 User Manual Chapter 3 Using the Panel PC Your panel PC is designed and pre-configured for easy setup and use. This chapter describes the installation steps you should follow to get the system and running as quickly as possible.

  • Page 32: Using The Serial Ports (Com)

    AcuPanel 12 User Manual 3.3 Using the Serial Ports (COM) There are two serial COM ports on the bottom. It is simple to attach a serial device to the panel PC, like an external modem or mouse. Please follow these instructions below for connecting : 1.

  • Page 33: Using The Usb Ports

    AcuPanel 12 User Manual 3.4 Using the USB Ports An external USB device may be connected to the system through the 4-pin USB ports located on the bottom side of the system unit. 1. Connect the external device to the system.

  • Page 34: Touchscreen

    AcuPanel 12 User Manual 3.6. Touchscreen ACUPANEL is designed using Color Active Matrix LCD technology with a high quality touch sensitive surface. The touchscreen is a display that can detect the presence and location of a touch within the display area by a finger, hand or other passive objects, such as a stylus.
  • Page 35 AcuPanel 12 User Manual 3. Remove the hard disk holders, and place them aside 4. Disconnect the cable from the hard disk by finger carefully. 5. Connect the cable to HDD and attach the holder to new hard disk. Make sure the holders are fixed to the HDD securely.
  • Page 36 AcuPanel 12 User Manual 6. Locate the HDD module slightly into the compartment firmly. 7. Cover the lid, then rotate and tighten the screws. 8. Set the boot device as CD-RW Combo drive and Primary Master as Auto on BIOS setup menu. Please refer to Chapter 4 about the setting of BIOS setup menu.

  • Page 37: Chapter 4 The Bios Setup Program

    AcuPanel 12 User Manual Chapter 4 The BIOS Setup Program This system comes with a chip from Award BIOS that contains the ROM Setup information for your system. (This chip serves as an interface between the processor and the rest of the system components.) This section explains the information contained in the Setup program and tells you how to modify the settings according to your system configuration.
  • Page 38 AcuPanel 12 User Manual Advanced BIOS Features This option lists all the features for advanced BIOS configuration. Advanced Chipset Features This option lists all the features for advanced chipset configuration. Integrated Peripherals This option lists all onboard peripheral devices. Power Management Setup This option lists all the power management items.

  • Page 39: Standard Cmos Features

    AcuPanel 12 User Manual 4.2. Standard CMOS Features The Standard CMOS Setup screen is displayed below. Each feature may have one or more option settings. Use the arrow keys to highlight the feature you want to change and then use PgUp/PgDn or +/- keys to select the value you want for that feature.
  • Page 40 AcuPanel 12 User Manual IDE Channel 0/1, Master/Slave This field records the specifications for all non-SCSI hard drives installed in the system. Press "Enter" for automatic device detection. Hard Disk Configurations IDE HDD Auto-Detection: BIOS CMOS Setup Utility will detect and configure had disk parameter automatically by pressing this item.

  • Page 41: Advanced Bios Features

    AcuPanel 12 User Manual Base Memory This field displays the amount of base (or conventional) memory installed in the system. Extended Memory This field displays the amount of extended memory (above 1 MB in CPU ís memory address map) installed in the system.
  • Page 42 AcuPanel 12 User Manual Hard Disk Boot Priority This item will auto detect all hard disks of bootable devices on the system or allow the user to select the boot sequence for system devices. Virus Warning This item allows you to choose the Virus Warning feature for IDE hard Disk boot sector protection.
  • Page 43 AcuPanel 12 User Manual Gate A20 Option This item allows the user to control the Gate A20 by chipset or keyboard controller with setting the option to Fast or Normal. Typematic Rate Setting This item allows you to activate or close the "Typematic Rate Setting"...

  • Page 44: Advanced Chipset Feature

    AcuPanel 12 User Manual 4.4. Advanced Chipset Feature DRAM Timing Selectable This item allows you to set the optimal timings. The system default setting is "By SPD". CAS Latency Time This item allows you to set the timing delay in clock cycles before SDRAM starts a read command.
  • Page 45 AcuPanel 12 User Manual DRAM RAS# Precharge This item allows you to set the DRAM RAS# precharge timing. Precharge delay (tRAS) This item allows you to adjust memory precharge time. System Memory Frequency This item allows you to adjust memory frequency to improve performance.

  • Page 46: Integrated Peripherals

    AcuPanel 12 User Manual 4.5. Integrated Peripherals OnChip IDE Device This item enables users to set the OnChip IDE device status, including IDE devices and setting PIO and DMA access modes. Some chipsets support newer SATA devices (Serial-ATA) Onboard Device This item enables users to set the Onboard Device status, including USB AC97, MC97 and LAN devices.
  • Page 47 AcuPanel 12 User Manual Serial Port 3 Use IRQ Lets you specify the parameter for Serial Port 3 use IRQ. The options are: IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10 and IRQ11. Onboard Serial Port 4 Lets you modify the serial port parameters when the serial port 4 uses the onboard I/O controller,.

  • Page 48: Onchip Ide Device

    AcuPanel 12 User Manual 4.5.1. OnChip IDE Device The Setup utility program allows updates to the system configuration settings. The BIOS setup values will be saved in the CMOS. It is executed when you change the system configuration, you change the system backup battery, or the system detects a configuration error and asks you to run the Setup program.
  • Page 49 AcuPanel 12 User Manual IDE Primary Master PIO Lets you specify the parameter to "Auto", "Mode 0", "Mode 1", "Mode 2", "Mode 3" or "Mode 4". IDE Primary Slave PIO Lets you specify the parameter to "Auto", "Mode 0", "Mode 1", "Mode 2", "Mode 3"...

  • Page 50: Onboard Device

    AcuPanel 12 User Manual IDE Secondary Slave UDMA Lets you close this function or allows BIOS to auto detect the parameter. The options are: "Disabled" and "Auto". On-Chip Serial ATA Lets you specify the mode with the options as "Disabled", "Auto", "Combined Mode", "Enhanced Mode"...

  • Page 51: Superio Device

    AcuPanel 12 User Manual USB 2.0 Controller This field lets you activate or close the onboard USB 2.0 feature. The options are: "Disabled" and "Enabled". USB Keyboard Support This field lets you activate or close the USB Keyboard Support. The options are: "Disabled"...
  • Page 52 AcuPanel 12 User Manual Onboard Serial Port 1 This field lets you modify your serial port parameters, when the serial port uses the onboard I/O controller. The options are: "Disabled", "3F8/IRQ4", "2F8/IRQ3", "3E8/IRQ4" and "2E8/IRQ3". Onboard Serial Port 2 This field lets you modify your serial port parameters, when the serial port uses the onboard I/O controller.

  • Page 53: Power Management Setup

    AcuPanel 12 User Manual 4.6. Power Management Setup ACPI Function This item defines the ACPI (Advanced Configuration and Power Management) feature that makes hardware status information available to the operating system for communicating PC and system devices in power management improvement.
  • Page 54 AcuPanel 12 User Manual Max Saving Lets you set the maximum power management to1 min. in Suspend Mode. User Defined Allows you to set each mode individually. Video Off Method This item allows you to set the monitor to be blank.
  • Page 55 AcuPanel 12 User Manual Wake-Up by PCI card This item allows you to enable and define how PCI cards wake the system up from suspend mode. The options are: "Disabled" and "Enabled". Power On by Ring This item allows you to make the system resumed by activating the modem ring.

  • Page 56: Pnp/Pci Configurations

    AcuPanel 12 User Manual 4.7. PnP/PCI Configurations Init Display First This item lets you start up video display from the PCI or onboard device. The options are: "PCI Slot" and "Onboard". Reset Configuration Data This item lets you clear any PnP configuration data stored in the BIOS. The options are: "Disabled"...

  • Page 57: Pc Health Status

    AcuPanel 12 User Manual DMA Resources This item lets you assign an interrupt type to DMA-0, 1, 2, 3, 4, 5, 6, or 7. 4.8. PC Health Status CPU Warning Temperature The feature’s options are Disable or Enable. CPU Warning Temperature Information is provided by the BIOS on this motherboard.

  • Page 58: Frequency/Voltage Control

    AcuPanel 12 User Manual 4.9. Frequency/Voltage Control Auto Detect PCI Clk This item lets you activate or close the Auto Detect PCI Clk. The options are: Disabled and Enabled. Spread Spectrum This feature allows you to activate or close the spread spectrum function. The options are: Disabled and Enabled.

  • Page 59: Set Supervisor/User Password

    AcuPanel 12 User Manual performance. The Fail-Safe Defaults are the default values set by the BIOS vendor for stable system performance. This submenu is selected for default settings with provide the best system performance. 4.11. Set Supervisor/User Password For security issue, please activate the Supervisor/User passwords entering with selecting the item at the Standard CMOS Setup sub-menu.

  • Page 60: Chapter 5 Jumpers And Connectors Setting

    AcuPanel 12 User Manual Chapter 5 Jumpers and Connectors Setting Jumpers and Connectors Jumpers and Connectors Setting A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
  • Page 61 AcuPanel 12 User Manual RS-422 JP1: (3-4) short JP2: (3-5)short JP3: (4-6) short RS-485 JP1: (5-6) short JP2: (3-5) short JP3: (4-6) short CMOS: CMOS clear connector Normal: (1-2) short-default CMOS clear: (2-3) short Internal Connector CF_SEL: CF-Card device select...

  • Page 62: Technical Support

    AcuPanel 12 User Manual With the unique set of products, Acura Embedded Systems remains committed to its goal of providing trouble-free and customer-friendly service. A special customer service unit has been set up specifically to cater to our esteemed customers' needs.

Table of Contents