Advertisement
Gun is an indispensable aid to the textile and garment industries. To get the maximum
benefit from this appliance it must be looked after. This manual is designed to help you
to keep the machine in good working condition.
Do's and don't's
1. Don't operate the gun without liquid.
2. The high-pressure produced from the spray gun might lead to injuries. Therefore do not
point gun at yourself or in the direction of other people.
3. Do not spray abrasive solutions.
4. Use filtered solutions to avoid cloggy of nozzle.
Drive housing
Pump locking screw
Nozzle
Pump housing
Container
Connection
cord
Connection to supply
The appliance can be operated from single - phase AC supply only. Before starting up, check that mains voltages agrees
with operating voltage marked on gun rating plate.
Information on spraying materials
1. The spraying of abrasive materials, is not covered by our Guarantee.
2. Moderately corrosive liquids (stain removers, insecticides, water aqueous solutions) can readily be sprayed from the
Pilot Electric Spray guns.
Pilot Power Stain Removing
Technical Data
Cover
Model
Control screw
Max. delivery rate
(test liquid: water)
Switch
Weight
Rated power
Handle
Voltage
Frequency
Container holds
Noise level
TEX 90
0.06 lit/min
1.30 kg
65 W
220/110V
50Hz / 60Hz
3
800 cucm
92 - 95 dB
Advertisement
