Table of Contents
Advertisement
4.5
FEED COVER INSTALLATION
1.
FOR SINGLE POL Ku-BAND FEED ONLY - After completion of the feed
installation, connection of the cable and polarity adjustment, bend the feed cover
tabs (item #7) in and then slide the feed cover (item #8) over the tabs. Attach the
cover to the tabs with the tapping screws (item # 9) and slide the cap (item #10)
over the cover as shown in figure 11.
[ 7 ]
[ 9 ]
SINGLE POLE Ku-BAND FEED
FIGURE 11
29
3.4M & 3.7M Az/El TRUSS MOUNT
[ 8 ]
4096-225
[ 10 ]
Advertisement
Table of Contents
