Page 2
(e.g. when performing measurements along public roads, on building sites etc.). Otherwise do not use the device. • Observe the storage and operating conditions as given in the Technical data chapter. Operating manual – brake fluid tester BW05...
Page 3
The brake fluid condition can be quickly read and interpreted for measurements at live parts. using the 3-colour LED. Trotec accepts no liability for damages resulting from improper Device depiction use. In such a case, any warranty claims will be voided.
Page 4
• The storage temperature is the same as the range given in dirt and residual fluid. the Technical data chapter. • Remove the batteries from the device. 2. After every measurement put the protective cap back on the measuring electrodes. Operating manual – brake fluid tester BW05...
Page 5
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. Operating manual – brake fluid tester BW05...
Page 6
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the BW05 and is the answer not in the manual?
Questions and answers