Subscribe to Our Youtube Channel
Related Manuals for Enomatic eno one
Summary of Contents for Enomatic eno one
- Page 1 2-bottle refrigerated wine dispenser User manual Distributed by Neodistributing 5555 Oakbrook Pkwy, Suite 120 Norcross, GA 30093 (800) 705-6940 www.enomatic.us eno one 2/r - user manual REV.05...
- Page 2 OF THE DISPENSER UNIT ................... 44 46. DRAINAGE OF THE DUCTS ................44 47. INFORMATION ON MAINTENANCE ..............45 48. GENERAL SCHEDULED MAINTENANCE ............45 49. SCHEDULED MAINTENANCE DISPENSER UNIT..........45 50. PERIOD OF NON-USE..................46 eno one 2/r - user manual TABLE OF CONTENTS REV.05...
- Page 3 51. TROUBLESHOOTING ..................47 52. INFORMATION ON REPLACEMENTS COMPONENTS ........52 53. DECOMMISSIONING AND DEMOLITION OF THE DISPENSER ...... 52 54. DECLARATION OF EC CONFORMITY ............... 53 55. GUARANTEE OF ENOMATIC PRODUCTS ............55 eno one 2/r - user manual REV.05...
-
Page 4: Warnings
2. During operation it is essential to pay attention to these safety requirements to prevent risks of fire, electric shock and/or other possible problems. 3. Do not place the Enomatic Dispenser near water spouts and do not immerse the power cord or other electrical/electronic components in water or other liquids. -
Page 5: General Information
2. GENERAL INFORMATION Purpose of the manual • The user and maintenance manual, which is an integral part of the ENOMATIC Dispenser, was designed by the manufacturer to provide the necessary informa- tion to the user. • The "ORIGINAL INSTRUCTIONS" were prepared by the manufacturer in ITALIAN and can be translated into other languages to meet legal and/or commercial requirements. -
Page 6: Introduction
3. INTRODUCTION The Enomatic® tasting systems are able to store bottles of wine, controlling the temperature (refrigerated models only) and preserving, by means of a food-use inert gas, their content, to then serve it in the desired quantities directly into the glass. -
Page 7: Packing And Unpacking
The package contains all the information necessary to perform movement correctly. The packaging material, at the Dispenser life end, must be properly disposed of in compliance with applicable laws. eno one 2/r - user manual PACKING AND TRANSPORTATION REV.05... -
Page 8: Packing Contents
• Conditioning partition for 1 white wine and 1 red wine • Disposable cylinder and pressure regulator • Cylinder cover casing • Graduated cylinder to measure doses For further information contact your authorised retailer. eno one 2/r - user manual PACKING AND TRANSPORTATION REV.05... -
Page 9: Transportation And Storage
Do not push the Dispenser, do not drag it or turn it upside down. If special needs so require it is possible to use the lifting devices shown in the image above. eno one 2/r - user manual PACKING AND TRANSPORTATION REV.05... -
Page 10: Technical Characteristics
L= 275 ÷ 330 mm L= 10.83 ÷ 13 in L= 10.83 ÷ 13 in ø ø ≤ < 110 mm 90mm ø ø ≤ < 4.33 in 3.54 in eno one 2/r - user manual CHARACTERISTICS AND COMPONENTS REV.05... -
Page 11: Components Of The Dispenser
O. Thermoelectric cooling system P. Bottle compartment Q. Temperature probe R. LED S. Dispensing nozzle T. Bottle raising piston T1. Gas spring T2. Spacer T3. Cylinder T4. Curved coaster U. Foot eno one 2/r - user manual CHARACTERISTICS AND COMPONENTS REV.05... -
Page 12: Commands Keyboard And Display
The A-Z references shown on this page and on the previous one, are mentioned throughout the manual. Do not use objects to press the buttons on the keyboard. use only the fingers of the hand. eno one 2/r - user manual CHARACTERISTICS AND COMPONENTS REV.05... -
Page 13: Positioning
Dispenser of the same model, that can also be connected to a single source of gas. For more information, contact the retailer. eno one 2/r - user manual INSTALLATION REV.05... -
Page 14: Thermoelectric Refrigeration System
Argon (E938) Nitrogen (E941) The gas is not supplied together with the Dispenser and can be purchased directly from the Enomatic retailer or from an authorised retailer of food-use gas in the con- tainers described below: • Disposable cylinder • Refillable cylinder In the event of high use of the Dispenser, it is advisable to use a Nitrogen Generator that is exclusively available from the retailer Enomatic. - Page 15 Close the regulator valve. Only unscrew the cylinder from the pressure reducer if it is fitted with a safety needle valve. DISPOSABLE PERFORATION CYLINDERS MUST NEVER BE REMOVED BEFORE THEY ARE COMPLETELY EMPTY eno one 2/r - user manual INSTALLATION REV.05...
-
Page 16: Electrical Connection
After a few seconds, the Dispens- er passes to the operating status illuminating only the active Dispensing (V) buttons with acti- vation of the thermoelectric mod- ule function for refrigeration of the bottle compartment (P). eno one 2/r - user manual INSTALLATION REV.05... -
Page 17: Secondary (Stand-By)
(Z) on. Rest condition (stand-by) To switch on the Dispenser from the stand-by condition, simply press the confirmation button (Z) until power- ing of the display. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 18: Rubber Straw Measurement
Always replace straws that are deteriorated from use. (e.g. torn, deformed). Further straws can be obtained from the retailer Enomatic. 19. FUNCTIONS MENU The Dispenser has a menu with features that are useful to set the main parameters and in order to interact with it. -
Page 19: F.1 Bottle Insertion
(T4) supplied click with the Dispenser (para.10 ). Repeat the same operation for the other po- sition. When inserting bottles with a flat click bottom remove the curved coaster. eno one 2/r - user manual USE AND OPERATION REV.05... - Page 20 (T) and to enable its ascent. Accompany the bottle until its mouth is resting on the seal of the plug tap (N). eno one 2/r - user manual USE AND OPERATION REV.05...
- Page 21 Enomatic. Having positioned one or both bottles, close the door. eno one 2/r - user manual USE AND OPERATION REV.05...
- Page 22 "F.1" disappear to exit the function. 3’’ The Dispenser will enter dispenser mode. Refrigeration of the bottle compart- ment will be reactivated. 3’’ eno one 2/r - user manual USE AND OPERATION REV.05...
-
Page 23: Replacement/Removal Of The Bottle
(para.18 ). In this case it is ad- visable to clean the straw (para. 43 ). When replacing the same wine it is possible to avoid washing the pipe. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 24: F.2 Temperature Scale Setting
Scroll with the arrow buttons (X, Y) to select the desired setting between “6÷18/OF” . Press the multifunction button (Z) to save the setting. Flashing of the display lines confirms successful saving of the setting. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 25: Temperature Setting
“6÷18/OF” or “43÷64/OF” Press the multifunction button (Z) to save the setting. Flashing of the display lines confirms successful programming of the set- ting. eno one 2/r - user manual USE AND OPERATION REV.05... - Page 26 The difference in temperature between the right compartment (temperature con- trolled) and the left one (derived temperature) will be approximately 8°-10°C (14,4°-18°F) in conditions of ambient temperature of approximately 25°C (77°F). eno one 2/r - user manual USE AND OPERATION REV.05...
-
Page 27: Dispensing
• In the case of free dose immediately, release the dose button (V). • In case of programmed dose, immediately press the dose button (V). eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 28: F.3 Free Or Programmed Dose Setting
"F1" are displayed. 3’’ Scroll with the arrow buttons (X, Y) to select the function "F.3" Press the multifunction button (Z) to access the function chosen. eno one 2/r - user manual USE AND OPERATION REV.05... - Page 29 Scroll with the arrow buttons (X, Y) to select the desired setting between “PO/PE”. Press the multifunction button (Z)to save the setting. Flashing of the display lines confirms successful programming of the set- ting. eno one 2/r - user manual USE AND OPERATION REV.05...
-
Page 30: F.4 Types Of Programmed Doses
Dispensing after insertion is essential in order to fill the ducts of the dispensing unit for precise storage of the dose. To measure the desired quantity it is recommended to use a graduated cylinder, sold by Enomatic reteiler. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 31: Setting Of Programmed Doses
“ .” Scroll with the arrow buttons (X, Y) to select the desired setting between “CO/nC/CA/dF”. Press the confirmation button (Z)to save the setting. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 32: Co (Copy) Dose Programming
The button relating to the dose just stored is now switched off. Repeat the same operation for the 2 remaining buttons. eno one 2/r - user manual USE AND OPERATION REV.05... - Page 33 Before inserting a bottle of wine it is advisable to perform the pipe empty- ing procedure (para. 46). eno one 2/r - user manual REV.05...
-
Page 34: Nc (Not Copy) Dose Programming
Dispens- er places itself automatically in oper- ating mode. Before inserting a bottle of wine it is advisable to perform the pipe empty- ing procedure (para. 46). eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 35: Ca (Copy All) Dose Programming
Before inserting a bottle of wine it is advisable to perform the pipe empty- ing procedure (para. 46). eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 36: F.5Led Intensity Setting [Default Value] 10]
Scroll with the arrow buttons to select the desired setting between “1÷10/OF”. Press the confirmation button (Z) to save the setting. Flashing of the display lines confirms successful programming of the set- ting. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 37: F.6 Washing And Sanitising Cl
32. F.6 WASHING AND SANITISING CL With this function it is possible to access the washing and sanitising program of the dispensing units. Enomatic recommends washing according to the dispenser unit scheduled maintenance table (para. 49) and every time that the message "cL"... -
Page 38: F7 Dispenser Version
(1) and the firmware version loaded (2). Once the display view is completed, the Dispenser automatically returns to the operating mode. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 39: Default Reset
"8.8." Flashing of the display and of the keyboard icons confirms successful default settings reset after which the Dispenser will automatically change to operating mode. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 40: Warnings
(Z). If the alert persists it will be displayed again after 24 hours or upon each subsequent access to the functions menu. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 41: Fault Alert Probe Pr
Technician, it is possible to contin- ue to use the Dispenser by setting the temperature to "OF" (para .23), thus in ambient temperature mode. eno one 2/r - user manual USE AND OPERATION REV.05... -
Page 42: Cleaning The Dispenser
Where cleaning the grills described above (C, D) is not sufficient to restore proper functioning of the refrigeration system, it is advisable to contact an au- thorised Technician or the Retailer to perform complete and precise cleaning of the refrigeration system (O). eno one 2/r - user manual MAINTENANCE REV.05... -
Page 43: Cleaning Of The Bottle Compartment
Once the procedure is finished, to return to the operating mode press the multifunction button (Z) for more than 3 seconds. Do not use solutions with characteristics other than those described in this manual for cleaning the dispenser unit. eno one 2/r - user manual MAINTENANCE REV.05... -
Page 44: Solutions For Washing And Sanitisation Of The Dispenser Unit
(V2). In the case of free dispensing mode "FE" (para. 25) hold for at least 5 sec- onds. 4. Wait a few seconds after the end of the dispensing for complete draining of the pipe. 5. Remove the empty bottle. eno one 2/r - user manual MAINTENANCE REV.05... -
Page 45: Information On Maintenance
< 9 each 150 approx Washing of the Dispenser unit (para. 44) Sweet wine < 18 each 120 approx Sweet wine < 45 each 100 approx Sweet wine > 45 each 30 approx eno one 2/r - user manual MAINTENANCE REV.05... -
Page 46: Period Of Non-Use
8. Clean the bottle compartment (para.42) 9. Clean the door gasket (B) Clean the command keyboard and display (par.40) Leave the door slightly open (to allow air circulation) Cover the Dispenser with the appropriate non-woven fabric bag. eno one 2/r - user manual MAINTENANCE REV.05... -
Page 47: Troubleshooting
The following information is intended to help identify and correct faults and mal- functions that may occur during use. If the problem persists or is not solved, please contact the Authorised Service Centre or Retailer. The list of retailers is available at www.enomatic.com PROBLEM POSSIBLE CAUSE... - Page 48 Remove any foreign objects foreign objects or the com- in the piston seat or position ponents of the piston are not the components of the piston correctly positioned correctly. to be continued eno one 2/r - user manual TROUBLESHOOTING REV.05...
- Page 49 (para. 6). Reposition the seal The gas connection pipe Request a new connection is flattened at one or several pipe from the retailer points to be continued eno one 2/r - user manual TROUBLESHOOTING REV.05...
- Page 50 Clean the door seal seal The LED (R) does The LED was set in "OF" = Change the setting of the not come on off mode LED intensity, according to requirement (para.31) to be continued eno one 2/r - user manual TROUBLESHOOTING REV.05...
- Page 51 The straw was not correctly Clean the straw or replace it serviced with a new one eno one 2/r - user manual TROUBLESHOOTING REV.05...
-
Page 52: Information On Replacements Components
Illegal dumping of the product by the user entails the application of administrative sanctions provided by the laws in force. In accordance with ISO-7000 graphical symbols used on the Dispenser eno one 2/r - user manual DISPOSAL REV.05... -
Page 53: Declaration Of Ec Conformity
50027 Strada in Chianti (FI) Italy declares under its responsibility that the appliance: AUTOMATIC DISPENSER FOR WINES, model: Eno one 2/r to which this declaration refers, is in conformity with the following legislation: IEC EN 60335-1: Safety of electrical equipment for household and similar use –... - Page 54 Name and signature of the authorised person President and CEO Lorenzo Bencistà Falorni Enomatic s.r.l. Via di Meleto,1 int.19 50027 Strada in Chianti (FI) - Italy VAT No. 01066310523 eno one 2/r - user manual DECLARATION OF EC CONFORMITY REV.05...
-
Page 55: Guarantee Of Enomatic Products
55. GUARANTEE OF ENOMATIC PRODUCTS Terms and conditions of the warranty provided by the manufacturer Enomatic S.r.l: Enomatic guarantees the material supplied for 24 months from the date shown on the invoice (invoice or receipt with packing slip), showing the details of the installed products. - Page 56 Produced by: Enomatic S.r.l. Via di Meleto,1 int.19 50027 Strada in Chianti Florence - Italy Distributed by: For assistance contact: eno one 2/r - user manual REV.05...
Need help?
Do you have a question about the eno one and is the answer not in the manual?
Questions and answers