Samsung SGH-ZV30 User Manual page 72

• Delete: delete the device or all devices.
• Rename: rename the selected device.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send → Via bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone's
Bluetooth feature must be active.
If an unauthorised Bluetooth device sends data to
your phone, the phone displays a confirmation
message.
To receive data, press <Yes>.
Infrared
(Menu 9.7.2)
Use this feature to send and receive data through
the infrared port. To use an infrared connection, you
must do the following:
• Configure and activate an IrDA-compliant
infrared port on the other device.
• Activate the infrared feature on your phone;
select Infrared → On.
• Align the IrDA port on the
phone with the IrDA port on
the other device.
If there is no communication
between your phone and the
other IrDA-compliant device
within 60 seconds of activating
the feature, it is automatically
deactivated.
Synchronize
(Menu 9.7.3)
Use this menu to synchronise personal data with
corresponding PC applications by using the
WideSync program supplied with your phone.
• Sync mode: set the phone to start
synchronisation automatically or manually.
• Sync frequency: select how often the phone
will synchronise.
• Sync direction: select which device is
synchronised.
• Allow server alerted sync: allow the server to
synchronise with your phone when asked or deny
the synchronisation request.
Network selection
(Menu 9.7.4)
Use this menu to select to either automatically or
manually select the network used when roaming
outside of your home area. You can select a network
other than your home network only if there is a valid
roaming agreement between the two.
69