Advertisement
Service and Installation Manual
The lid may be cleaned in the same way as the freezer.
If a condenser and associated fan are fitted at the back bottom of the freezer, they can gather dust and dirt.
If cleaning is necessary, they should be vacuumed with a soft brush.
Please note that the parts behind the protective grille can be hot and rotating.
TROUBLE SHOOTING
If you are having problems with your freezer, please check the following point before calling service
personnel:
—Is the freezer connected to the power supply?
—Is the socket switch on?
—Is the fuse in the switch cabinet intact?
—Has the earth leak circuit breaker (if there is one) cut out?
—Has there been power cut?
If the freezer is in a place that is very hot or with bad ventilation, make sure to provide adequate ventilation.
If the condenser mentioned in Section Maintenance is not clean, make sure to vacuum it.
If the above points have been checked and the freezer is still not working, please call service personnel.
Inform them the nature of the problem, the type of freezer, serial number and item number (provided on the
nameplate at the back of the cabinet).
Do not open the cabinet, as every opening hastens the thawing point. Generally the frozen contents will not
suffer damage during the first 12 hours. If more time passes, the contents must be moved to another freezer.
DISPOSAL
Please be aware of the local regulations for disposal.
Information about disposal may be obtained from:
—your supplier;
—the relevant authorities (the Local Authority, environmental agencies, etc.).
SPECIAL POINTS TO NOTE
The information contained in this document was correct at the term of printing. Due to constant
produce development we reserve the right to make changes in the units described herein.
If you are in doubt as to the correct use of the freezer, please contact your supplier.
The manufacturer and distributors/resellers are not responsible for accident or problems resulting
improper installation or usage.
4
Advertisement
