Page 1
OPERATING MANUAL March 2005 PUBL. NO 4869057-00 Edition 4...
Page 2
English TABLE OF SAFETY CONTENTS Read the operating instructions BEFORE operating the machine. Safety ......8 Our warranty/product responsibility requires that instructions are followed and Operating instructions... 9 that original spare parts and recommended hydraulic oil and lubricants are used. Technical specifi...
Page 3
English WARNING! OPERATING INSTRUCTIONS Only the operator Mounting the strap is allowed in the machine’s working area! Mounting the strap Make sure that the press plate is lowered. Open the upper and lower doors fully. Place the straps in the strap holders, pull the straps through the loops and behind the pin at the back of the...
Page 4
English TECHNICAL DIMENSIONAL DRAWING SPECIFICATIONS (Valid for 490 3400-00 unless otherwise indicated) GENERAL DATA Total weight: 1,350 kg (-02, -04) Transport height: 2,150 mm A= 2150 A= 2150 Dimensions: (-02,-04) B= 2983 B= 2783 Height: 2,983 mm C= 2000 C= 2000...
Page 5
English INSTALLATION TEXT FOR THE PICTURES ON THE LAST DOUBLE-PAGE SPREAD Read through the whole instructions before installing the machine! If the instructions are not followed, this could result in personal injuries. (The machine is packaged using recyclable plastic.) Make sure that nobody except the qualifi ed and competent installation engineer is in the vicinity of the machine during the installation process! Only one person is allowed to carry out the installation.
Page 6
English WEEKLY INSPECTION AND MAINTENANCE NOTE! During inspection and maintenance, service work and the removal of trapped waste etc.: • Always turn the main switch to ”0” and secure it with a padlock. • Do not work inside the machine SAE 20 >+5°C Hydraulic oil...
Page 7
English DECLARATION OF CONFORMITY AB ORWAK Box 58 S-576 22 Sävsjö, Sweden Tel: 46-382-15700 Telefax: 46-382-10607 declares under its sole responsibility that the product model (serial number specifi ed on the fi rst page) 4903400-00 - 4903400-99 to which this declaration relates is in conformity with the following...
Page 8
Installation Box 58 576 22 Sävsjö Sweden Type Serial No Product No Date min. 2983 mm 2,5 mm (8x) Check 10 mm 18 mm...
Page 9
Installation ~900 mm 24 mm 22 mm N1 N2 10 mm ca. 150 Nm Q1 2 Q3 1 Q3 2 200 mm 18 mm c) c) 3 MM! MRX x 25 BRB 5,3...
Need help?
Do you have a question about the 3400 and is the answer not in the manual?
Questions and answers