Maintenance; Cleaning; Accessories; Repairs - DeWalt DCV517 Instruction Manual

MAINTENANCE

WARNING:
To reduce the risk of serious personal
injury, turn tool off and remove the battery pack before
making any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Empty the vacuum often, especially when wet debris is in the canister.
• MAINTAIN TOOL WITH CARE. Keep fan area clean for best and
safest performance.
• Do not attempt to repair the vacuum. To assure product safety
and reliability, repairs, maintenance, and adjustments should be
performed by authorized DEWALT service centers.

Cleaning

WARNING:
Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk of eye injury,
always wear ANSI Z87.1 approved eye protection when performing
this.
WARNING:
Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the tool. These
chemicals may weaken the plastic materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING:
Shock hazard. Disconnect the charger
from the AC outlet before cleaning. Dirt and grease may be removed
from the exterior of the charger using a cloth or soft non-metallic
brush. Do not use water or any cleaning solutions.
View other Power Tools made by DeWalt Tools on our website.

Accessories

WARNING:
Since accessories, other than those
offered by D WALT, have not been tested with this product, use of
e
such accessories with this tool could be hazardous. To reduce the
risk of injury, only D WALT recommended accessories should be used
e
with this product.

Repairs

WARNING:
The charger and battery pack are not
serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D WALT factory service center or a D
e
authorized service center. Always use identical replacement parts.
WALT
e