Advertisement
1. Install one 'mercury' (not
included) batteries to the
remote control.
2. Most of the functions
performed with the Remote
Control work identically to the
Manual Controls (Ionic
function needs to activated by
remote control).
When the remote control not
3.
in used, store it into remote
control storage at rear cover
(See FIGURE 1A)
SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating;
2. When an overheat temperature is reached, the Heater will be
automatically shut off. It can only resume operation when the user
resets the unit.(See Reset instructions below)
To Reset Heater:
5. Unplug the Heater and wait 10 minutes for the unit to cool down.
Inspect it and remove any objects on or adjacent to the heater that
may cause overheating.
6. After 10 minutes plug the unit in again and operate normally.
7. Plug in the appliance and switch it on. If the appliance can not
operate normally, remove the plug immediately from the socket and
8
Advertisement
