Advertisement
Once the timer has been set, the timer will count down the hours in 1
hour increments, showing on the display the remaining operating time,
until the Heater will turn itself off. Pressing Timer setting button once
more after the display reflects 8 hours will reset the Heater to
continuously running.
TEMPERATURE INSTRUCTIONS (FIGURE 2)
1.To adjust SET temperature, press "MODE" button two times, the
Heater turns into "AUTO". Press the TEMP. Button to (+) to increase the
desired temperature and press TEMP. (-) to decrease the desired
temperature. When all things are set, the LED will be blink 5 times, then
return to normal status.
2.When the air temperature reaches the SET temperature, the heater
will cut off.
3.When the air temperature drops the SET temperature, the unit will
operate again.
6
Advertisement
