Table of Contents
Advertisement
Firmware Version
The MXA80 functionality is controlled by internal
software that is known as Firmware. The Version of
the Firmware in the MXA80 can be identified at any
time by utilizing the Setup Mode.
1. Press and hold the INPUT CONTROL until the
Front Panel Display indicates "MXA80 V .
S/N: AEU
". The number after the "V" is the
firmware version and the number after the "S/N"
is the serial number of the unit. Refer to figure 2.
MXA80
V_.__
S/N: AEU____
Figure 2
2. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will revert
back to its normal display.
18
Input Renaming
The MXA80 Default Input Names (UNBAL, BAL-
ANCED, OPTICAL, COAX and AES/EBU as indi-
FDWHG RQ WKH )URQW 3DQHO 'LVSOD\ FDQ EH FXVWRPL]HG
with a different name up to eight characters long (My
3KRQH 0&' HWF 7KH DYDLODEOH FKDUDFWHUV IRU
,
renaming the input include the following: ! < > * , / -
0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t
u v w x y z A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z .
In the following example, the UNBAL Input will be
renamed to "MY-PHONE".
1. Press and hold the INPUT CONTROL until the
Front Panel Display indicates the Model, Firmware
Version and Serial Number. Refer to figure 2. Then
rotate the INPUT CONTROL and select the Setup
Menu item "INPUT: UNBAL, NAME: UNBAL".
Refer to figure 4.
INPUT:
UNBAL
NAME:
UNBAL
Figure 4
Note: If the UNBAL Input is not displayed, rotate the
OUTPUT Control repeatedly until it is dis
played.
2. Press and hold in the INPUT Control until the
character "U" of the "NAME: UNBAL" starts
IODVKLQJ DQG LV XQGHUOLQHG 5HIHU WR ILJXUH
INPUT:
UNBAL
NAME:
UNBAL
_
Figure 5
3. Rotate the INPUT Control until the character "M"
appears. Refer to figure 6.
4. Rotate the OUTPUT Control until the character
"N" of the "NAME: UNBAL" starts flashing.
Refer to figure 7.
INPUT:
UNBAL
NAME:
MNBAL
_
Figure 6
INPUT:
UNBAL
NAME:
MNBAL
_
Figure 7
5. Rotate the INPUT Control until the character "Y"
appears. Refer to figure 8.
INPUT:
UNBAL
NAME:
MYBAL
_
Figure 8
6. Repeat steps 3 thru 5 until the new name of "MY-
PHONE" is indicated on the Front Panel Display.
Refer to figures 9 thru 11.
INPUT:
UNBAL
NAME:
MY-AL
_
Figure 9
INPUT:
UNBAL
NAME:
MY-PL
_
Figure 10
INPUT:
UNBAL
NAME:
MY-PHONE
Figure 11
7. To save the new Input Name press and hold the
INPUT Control until the "character underline"
disapears on the Front Panel Display. Refer to
figure 12.
INPUT:
UNBAL
NAME:
MY-PHONE
Figure 12
_
Advertisement
Table of Contents
