Aktakom ATE-2566 User Manual page 2

Features:
 Rapid detection function
 Precise non-contact measurements
 User selectable ºC or ºF
 Dual laser sighting
 Automatic Data Hold
 Trigger lock
 Emissivity Digitally adjustable from 0.10 to 1.0
 MAX/MIN temperature displays
 Automatic selection range and Display Resolution 0.1ºC(0.1ºF)
 Automatic Data Hold & Auto power off
 Set high and low alarms
 The meter at 10 inches away measure 1 inch target
 Backlight LCD display
Wide range application:
Food preparation, Safety and Fire inspectors, Plastic molding, Asphalt, Marine and screen printing, measure ink and
dryer temperature, Diesel and Fleet maintenance.
Field of View
The meter's field of view is 10:1, meaning that if the meter is 10 inches from the target, the diameter of the object under
test must be at least 1 inch. Other distances are shown below in the field of view diagram. Refer to the chart printed on
the meter for more information.
D:S= 10:1
1. SAFETY
 Use extreme caution when the laser beam is turned on.
 Do not let the beam enter your eye, another person's eye or the eye of
an animal.
 Be careful no to let the beam on a reflective surface strike your eye.
 Do not allow the laser light beam impinge on any gas which can
explode.
12. 5mm @ 125mm
25mm @
0.5in @ 5.0in. 1in @10in.
D
www.tmatlantic.com
250mm
S
2