Advertisement
Quick Links
NuForce 192kHz/24bit USB Driver Setup Guide
Install Driver & Software:
After downloading the driver, run the Installation program. After the installation,
an icon linking to the NuForce Stereo Audio Control Panel program will appear
on your desktop. For now move on to the Connect Hardware step, as detailed
information regarding software adjustment will follow.
Connect Hardware:
Once the software has been installed, connect a digital coaxial or optical cable
from the output of the U192S to the input of your chosen DAC. Plug the provided
USB cable between the computer's USB port and the U192S. After the cable is
connected, a window will pop up at the lower-right side of the display that reads:
NuForce Async USB Audio 192K HS installed
A white LED 44.1k
will indicate power-on status.
Select Playback:
Right click on speaker icon at the bottom right and select Playback Devices.
Choose SPDIF OUT and close window.
Adjust Software (Windows 7 Setup):
Direct Sound (DS) is the default Windows audio mode and it operates with the
Windows Mixer enabled. This means other sound prompts (such as email
notifications, etc) will be mixed into the music output. A single sample rate must
therefore be used as the common denominator. For music playback in Windows 7,
WASAPI mode (Windows Audio Session API) is the preferred and purest mode.
(See WASAPI section)
382 South Abbott Avenue, Milpitas, CA 95035, USA • PHONE: +1-408-890-6840 • FAX: +1-408-262-6877
nuforce.com • EMAIL: salesteam@nuforce.com • Skype: nuforce-sales
Advertisement
Related Manuals for NuForce U192S
Summary of Contents for NuForce U192S
- Page 1 Once the software has been installed, connect a digital coaxial or optical cable from the output of the U192S to the input of your chosen DAC. Plug the provided USB cable between the computer's USB port and the U192S. After the cable is...
- Page 2 Selection is made via the Audio Control Panel (CPL) section of the NuForce Stereo Audio Control Panel. For the best sound quality in Direct Sound mode, you will need to manually select the Audio Format so that it matches the music file format.
- Page 3 When music is being played, the Audio Format cannot be changed on the fly. The music must be stopped before you can make the next change (Note the message: Stop Player The ASIO tab should be set to 24-bit and Auto Adjust:...
- Page 4 WASAPI Mode: Some media players require a special WASAPI plug-in to enable support for WASAPI. Once installed and activated, WASAPI can be selected as the default audio driver. Below is a screenshot of Foobar2000 in Windows 7 (after WASAPI plug-in has been installed) showing different supported device driver options: As you can see, both Direct Sound (DS) and WASAPI options are listed.
- Page 5 This is a result of WASAPI's ability to provide automatic playback of the music file in its native format apart from those of other Sound Effects settings. Download Driver (Mac OS Installation): First, you will need to download the required driver from the following location: http://www.nuforce.com/hp/support/download/download.php...
- Page 6 Once the software has been installed, connect a digital coaxial or optical cable from the output of the U192S to the input of your DAC. Plug the provided USB cable between the computer's USB port and the U192S. A white LED 44.1k will -on status.