Advertisement
Safety Instructions :-
Stay alert and use common sense - Do not operate the tool when you are tired or under the
influence of alcohol, drugs or medication.
Always wear eye protectors when using the angle grinder - Eye protectors must provide
protection from flying particles from the front and the side.
Always wear ear protectors when using the angle grinder .
Do not overreach - Keep proper footing and balance at all times.
Do not use tool if Switch does not turn it "ON" or "OFF", it is dangerous.
Check wire before use, and ensure that all connections are secure.
Do not carry out any alterations or modifications to the angle grinder .
Work Environment :-
Do not disconnect the Tool release the operating Knob of tool and then switch off electric
supply, disconnect the plug from power and then make any adjustment , changing of
accessories or storing of tool.
Store the tool in it's box in dry , secure environment.
Packing Box Contains :-
Main Tool with Loc Nut---------------------------------------------1 Unit
18 AWG x 2 Core Cod Wire 1.5 Mtr.Long---------------------1 no.
With 2 Pin Molded Plug
Wheel Guard----------------------------------------------------------1 no.
Carbon Brush---------------------------------------------------------2 no
Side Handle-----------------------------------------------------------1 no.
Tightening Spanner For Lock Nut-------------------------------1 no
Operation and Maintenance Manual---------------------------1 no.
Sheet 4 of 4
Electric Angle Grinder
Model - AG4E - 110V and 220V
FF - MM - 184 REV - 0
Advertisement
