What Is With The Crazy Light Show?; Selection Encoders - Peavey VYPYR 15 User Handbook Manual

What is with the crazy light show?

It is to keep our amps from getting bored when they aren't doing anything. Don't worry, when you
plug your guitar into the amp the light show will automatically stop and will remain off for the
remainder of your session. If your cable is plugged into the amp when you power on, the light show
will remain off. If you want to disable the light show entirely, simply press and hold preset buttons
3 and 4 simultaneously while turning on the amp. The next time you turn on the amp, the light show
will be disabled.,

Selection Encoders

To the right of the input jack the VYPYR is divided into THREE SECTIONS: STOMPBOx select,
®
AMPLIFIER select, and EFFECTS select control encoders. By turning any of the encoders you will
notice the corresponding LED will indicate the item you have selected.
Why didn't you put the amp knob on the left like other amplifiers? The THREE sections are po-
sitioned from left to right in the ORDER you would find them in the signal path. STOMPBOxES usu-
ally come BEFORE the amplifier in the signal path, therefore we thought it best to put them FIRST on
this amplifier.