Installing M320 Onto The Main Board Of Pc - ECS M320 User Manual

3. Installing M320 onto the main board of PC

(1) Insert the mini-PCIe golden finger interface of M320 into the mini-PCIe
connector on the Main Board of PC, then Press down to fix the M320 in the
module slot.
(2) Use a screwdriver to fix the M320 onto the Main Board of PC with two screws.
(3) Insert the connector of antenna cable into the connector of antenna interface
on the M320.
4. Safety Notice
Please read the safety notice carefully to ensure the correct and safe use of your
wireless device (HSDPA mini-PCIe Modem Module).
4.1 Interference
Do not use your wireless device if using the device is prohibited or when it causes
danger or interference with electric devices.
4.2 Areas with Inflammables and Explosives
To avoid explosions and fires in areas that are stored with inflammable and
explosive devices, do not use your wireless device and observe the related
rules. Areas stored with inflammables and explosives include but are not limited to
the following:
Gas station
Fuel depot (such as the bunk below the deck of a ship)
Container/Vehicle for storing or transporting fuels or chemical products
Area where the air contains chemical substances and particles (such as
granule, dust, or metal powder)
Area indicated with the "Explosives" sign
Area indicated with the "Power off bi-direction wireless equipment" sign
Area where you are generally suggested to stop the engine of a vehicle