Table of Contents
Advertisement
Quick Links
Quick Installation Guide
Travel Router SKINNY
Thank you for purchasing this mini Travel Router.
Be familiar with this device:
1. USB Cable and connector
2. LAN port (RJ45 Ethernet port)
3. WPS/Reset button (Press to activate WPS pairing mode or Reset to factory default)
4. LED indicator
LED status:
LED
Internet
WPS
1
3
Color
LED Status
Blinking
Blue
Steady On
Off
Steady ON
Blinking
Green
Quick blinking
off
4
Description
System is under booting up.
Or device ready for "Reset to factory
default".
Successfully connect to internet (On
internet)
No internet connection
When WPS connection is successful, turn
on for 5 minutes.
WPS is in progress, blinking (0.2 second
on, 0.1 second off) for 2 minutes (waiting
for WPS connection)
WPS error, blinking (0.1 second on, 0.1
second off)
No power/No WPS in progress
2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ECS SKINNY
Summary of Contents for ECS SKINNY
-
Page 1: Quick Installation Guide
Quick Installation Guide Travel Router SKINNY Thank you for purchasing this mini Travel Router. Be familiar with this device: 1. USB Cable and connector 2. LAN port (RJ45 Ethernet port) 3. WPS/Reset button (Press to activate WPS pairing mode or Reset to factory default) 4. -
Page 2: Quick Installation
Quick Installation: Before you can use this Travel Router to access Internet, please make sure your computer is set to DHCP client (obtain IP automatically from DHCP server) and follow the following steps to setup this Travel Router device. Insert the USB cable of Travel Router into an available USB port on your computer or USB power adapter. - Page 3 Next, input password and then click ‘OK’. Default password is ‘62586258’ as shown on the right. Please note that you have to enter correct password if you changed it. If the password you entered is wrong, you’ll be asked to input password again.
-
Page 4: Login Web Ui
Login Web UI: After wireless connection is sucessfully linked to this Travel Router but you see this page when you try to access internet , it means internet connection has a problem. (Blue LED of Travel Router is off). You can select to login Router firmware to setup it or select another to close message window. - Page 5 Click ‘Quick Setup’ Please select working mode of this travel router: Travel router mode: This travel router will connect to Internet by wired network, and client uses wireless connection to access Internet. Wireless ISP mode: This travel router will connect to Internet by wireless network, and client also uses wireless connection to access Internet.
- Page 6 Travel Router Mode: Please setup wireless security of this Travel Router here if you want to change. Or you can use default value and click ‘NEXT’ button to continue. SSID: Input the Service-Set IDentifier (a name used to identify this device for wireless network) here, you can use any words which will help you to identify your own Travel Router.
- Page 7 security, and then select Pre-shared Key Format (Passphrase or Hex characters), and then input passphrase characters in ‘Pre-shared Key’ field. When you’re ready, click ‘NEXT’ button. If you see this message, please use Ethernet cable to connect the LAN port of Travel Router and Internet gateway (i.e.
- Page 8 If you select ‘Yes’ in last step to add bookmark, you can define the name of bookmark here. Click ‘Add’ to add bookmark or ‘Cancel’ to abort. (Recommend you to add it) Please be patient while Travel Router is applying new settings. Congratulations! The Quick Setup is completely done, now you can start to enjoy this travel router.
-
Page 9: Wireless Isp Mode
Wireless ISP Mode Travel Router will perform wireless site survey. Please check the list and see if the access point(Wireless ISP) you wish to connect is listed here. If not, please click ‘Refresh’ button and / or move Travel Router closer to access point you with to connect. - Page 10 Please input the wireless security settings for your wireless client here or you can use all default values without change. Then click ‘Apply’ button. (Refer to ‘Security Setting’ in ‘Travel Router Mode’) In the last step of Quick Setup, you can recheck all settings and select to add web address of this Travel Router for future use, please select ‘Yes’...
Need help?
Do you have a question about the SKINNY and is the answer not in the manual?
Questions and answers