Made in Germany
1 Quick Start Guide
When switching on the meter, the LCD will briefly show
"batt" and the remaining operation time with the current ca-
pacity of the batteries (you may need to switch off the NFA
after a couple of minutes and on again in order to update the
information (see page 2)).
"Signal" -> default setting is tRMS
"On" = Measurement in process
"Log" = Long term recording in process
Double-click NFAsoft and follow your intuition for an evalua-
tion of the data recorded on the SD-card.
Should the meter not do what you expect, please turn to the
chapter on frequently asked questions at the end of this
manual (Chapter 9)!
2 Overview: Front Cover
- 1 -
© Gigahertz Solutions GmbH
January 2018