Hitachi DH24PC Handling Instructions Manual page 19

8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
9. Drilling holes (rotation only)
Drill chuck (13VLA)
Chuck wrench
13 mm drill chuck ass'y (includes chuck wrench) and chuck (for drilling in steel or wood).
10. Driving Screws (rotation only)
11. Dust cup and Dust collector (B)
Dust cup
Optional accessories are subject to change without notice.
Drill chuck (13 VLR)
Chuck wrench
Chuck adapter (D)
(SDS Plus shank)
Bit No. Chuck adapter (D)
(SDS-plus shank)
Bit No.
No. 2
No. 3
Dust collector (B)
Chuck adapter (G)
(SDS-plus shank)
Screw Size Length
3 – 5 mm 25 mm
6 – 8 mm 25 mm
12. Hammer grease A
500 g (in a can)
70 g (in a green tube)
30 g (in a green tube)
18