INSTRUCTION MANUAL
Keep these instructions
for future reference, as they contain important information.
START HERE!
ADULT ASSEMBLY REQUIRED.
Follow the step-by-step instructions to set up your race set.
Please separate the "Assembly Map" page, and keep it handy during
assembly. This page contains the contents list and large-scale Layout
Drawing of the fully-assembled track. You'll probably need to refer to
it as you go.
The Assembly Map looks like this:
CONTENTS LIST
1 x
1 x
1 x
3 x
9" TERMINAL TRACK
15" STRAIGHT
6" STRAIGHT
9" RADIUS CURVE
(1/4 CIRCLE)
2 x
8 x
1 x
1 x
9" RADIUS CURVE 1/4 CIRCLE
GUARDRAILS
Tumbler
(DOUBLE-RAIL TRACKS)
LAYOUT DRAWING - 3-D VIEW
REFER TO THE PACKAGE FOR COLOR PHOTOGRAPHS OF THE ASSEMBLED TRACK.
1 = Beginner
2 = Average player
3 = Skilled player
1
2
Look for this symbol
throughout this manual. It indicates important
information.
Be sure to check out the Troubleshooting Guide on the back of the
Assembly Map.
I. BASIC TRACK ASSEMBLY
Start out on a clean, hard, flat racing surface – not carpeting.
Take out all the track pieces (and other parts) and check them
carefully against the contents list on the Assembly Map.
This track features a SUPER CLIFF HANGERS™ vertical section
that lets you race up the wall. So make sure you've chosen an
assembly location with a wall surface handy.
This page shows the contents list and large-scale Layout
Drawings of the fully-assembled track (tracks are not drawn to scale).
You'll need to refer to it as you assemble your race set.
Refer to the Instruction Sheet for detailed step-by-step instructions
for setting up and using your race set.
1 x
4 x
2 x
1
1 x
6 x
2
9" RADIUS CURVE
TRANSITION TRACK
#2 SUPPORTS
#3 SUPPORT
CLIPS
(1/4 CIRCLE)
1 x
2 x
2 x
1 x
2 x
1 x
Bat
CRADLES
SANDPAPER
CONTROLLERS
BATTERY PACK
IF ANY PARTS ARE MISSING OR DAMAGED - DON'T RETURN YOUR RACE SET TO THE STORE!
CALL OUR RACING SUPPORT TEAM TOLL - FREE AT 1-888-557-8926 FOR HELP.
1
1.
T
e h
e r
a
e r
used in these instructions to indicate which track piece goes where.
Following the layout drawing on the Assembly Map, you may want
to lay out your track – without connecting any track pieces. That way
you'll be able to see how the track layout goes together.
2.
o T
o c
n n
c e
the flat surface, push the ends of
the track pieces together. Make sure
they snap together securely – you'll
hear a click when they're properly
connected. Remember: if the track
connections aren't right, electric
power won't flow from one track section to the next.
Remember: if the track connections aren't right, electric power
won't flow from one track section to the next.
3.
o T
d
s i
o c
n n
CLIP ARTS
underneath where the track pieces meet
and press the locking tabs together with
1
2
= TRACK SUPPORTS
thumb and forefinger as shown.
= GUARDRAILS
Occasionally the metal track rails will stick up too far from the
surface of a track piece, as shown. This may interfere with vehicle
movement. To correct, simply press the rail back down with your
finger. If the problem persists, please contact Customer Service
at the toll-free number shown in this manual.
Sometimes brand-new track may need a quick cleaning for best
performance. Check the Maintenance section of this manual for
more information.
CAUTION: This product contains a
sharp edge(s). For adult assembly
only. Take extra care during
unpacking and assembly.
e l
e t t
s r
m
o
d l
d e
n i
o t
a e
h c
t
a r
k c
t t
a r
k c
p
e i
e c
: s
w
o
i k r
g n
n o
c e
t t
a r
k c
i p
c e
s e
s ,
m i
p
y l
r
a e
h c
5+
W5784-0920
p
e i
e c
T .
e h
e s
e l
e t t
s r
a
e r