Specifications - Bayan Audio SILVERPOINT User Manual

Troubleshooting (contd)
To perform a factory reset, turn on your speaker and wait for the RED light to stop flashing (indicating it has completed its
initialisation)
At the rear of the speaker, locate the button labelled 'WIFI MODE'. Press and hold this button for 5 seconds, then let go.
The RED light at the front will flash as the speaker restarts.
Once the RED light has stopped flashing, your speaker has been factory reset and is ready for network configuration –
see the Quick Start section of this user guide.

Specifications

System Requirements
• To use StreamQ App requires: iOS 9 or higher, Android 4.4 KitKat or higher
• For HD Audio requires (minimum): 5G Wireless N WiFi or 100 Base T Ethernet network
• For streaming from online music services requires: internet connection (fibre broadband recommended)
• Recommended: Dual band Wireless AC router with 128 MB RAM
• Power – requires 110-240 V AC 50/60Hz mains connection
19