Table of Contents
Advertisement
Step 3: Attach Soffits
It is important to note hole orientations for the following steps.
A: Flush to the inside face of the Left Side Wall, centre 1 (031) Soffit and attach with 4 (S20) #8 x 1-3/8" Wood
Screws. Notice the 2 unused holes on the outside as shown in fig. 3.1 and 3.2.
B: On the Front Wall and Back wall, tight to the (031) Soffit and flush to the inside face of each wall attach 1
(032) Soffit Long to each wall using 6 (S20) #8 x 1-3/8" Wood Screws. Note hole orientations (Fig. 3.1 and 3.2)
C: Tight to the (032) Soffit Longs and flush to the inside face of each wall attach 1 (033) Soffit Short per wall
using 3 (S11) #8 x 1-3/8" Wood Screws.
D: Flush to the inside face of the Right Side Wall panel between the (033) Soffit Shorts attach 1 (034) Soffit
Wide using 4 (S20) #8 x 1-3/8" Wood Screws.
E: There should be an overhang of 1" from the Wall Panel to the outside of the soffit on Front and Back Panels.
(Fig. 3.1)
Fig. 3.1
1" overhang
Left Wall
Notice the
2 unused
holes
031
1" overhang
Fig. 3.2
Wood Parts
1 x
Soffit 5/8 x 2-7/8 x 34"
031
1 x
Soffit Long 5/8 x 2-1/2 x 47-1/2"
032
1 x
Soffit Short 5/8 x 2-1/2 x 15-7/8"
033
1 x
Soffit Wide 5/8 x 3-1/2 x 34"
034
Notice hole orientations
032
Flush inside face
Notice hole orientations
032
Hardware
26 x
#8 x 1-3/8" Wood Screw
S20
Right Wall
Front Wall
17
1" overhang
033
034
Right Wall
033
1" overhang
x 26
S20
europecustomerservice@kidkraft.com
Advertisement
Table of Contents
