Windows Me: Modifying A Workgroup Name - Hercules HWNR-300 User Manual

Hercules Wireless N Router

4.5.5.Windows Me: Modifying a workgroup name

It may happen that you need to change the name of your workgroup (advanced users only). To do so,
proceed as follows:
4.5.6.Windows Me: Manually enabling or disabling your
adapter's WiFi connection (advanced users)
You can manually enable or disable your adapter's WiFi connection for a variety of reasons: to temporarily
avoid connecting to networks, save battery power, etc.
To manually enable or disable your adapter's WiFi connection in Windows Me:
- Access the Device Manager.
- Select your WiFi adapter in the list of network adapters.
- Right-click your adapter and select Properties.
- To enable your adapter, select Enable. To disable it, select the Disable option.
For more information on manually enabling or disabling the adapter in Windows Me, please refer to the
Windows online help utility.
74/101 – User Manual
1. Click Start/Settings/Control Panel.
Network.
2. Select the Identification tab.
3. In the Computer name zone, enter a name
sufficiently distinctive that it can easily be recognized
in the list of computers for the
computer, wifi-computer or julie, for example).
4. In the Workgroup zone, enter a name for the group
(HOME, OFFICE or HERCULES, for example).
The workgroup name must be identical (be sure to
respect the case of letters) for all computers you wish to
link together in a network.
5. Click OK. A Windows message indicates that the
task has been carried out successfully and that you
must restart the computer.
6. Repeat this procedure for each computer.
HWNR-300
Double-click
workgroup (my-