Connecting To A Network In Client Mode - Hercules HWNR-300 User Manual

HWNR-300
You now have two minutes to connect your Hercules Wireless N USB Key or your device via WPS.
If the connection is not secure, a
generated automatically.
For more information on connecting your device via WPS, please refer to the PDF user manual of your
Hercules Wireless N USB Key or to the manual supplied by the manufacturer of your WPS device.

2.9.2.Connecting to a network in client mode

Note: by default, your Hercules Wireless N Router is configured to master mode, meaning that it will serve
as the access point to which other WPS devices will be able to connect. By switching to client mode, your
Router will connect to a master WPS device which will become the access point. You should be aware,
however, that your Hercules Wireless N Router, with its router function, is not meant to connect to other
WPS devices.
WPA or WPA2 type security key (depending on the client's capabilities) is
- On the WiFi Manager N home page, press the
- Click the Advanced settings button.
Two options are available to you: Master mode or
Client mode.
- Select Client mode.
WiFi Manager N displays the PIN code for your
Hercules Wireless N Router. Make a note of this
code, as you will have to enter it in the client's
interface in order to connect your Router to other
devices.
Automatic WiFi client connection (WPS)
button.
Hercules Wireless N Router
User Manual – 21/101