Attaching The License Light And Trailer Electrical Outlet - Kubota B1220 Assembly Instructions Manual

BAttaching the License Light and Trailer
Electrical Outlet
[B1620, B1820]
1. Attach the license light (2) to the license light stay (1)
with the washers and nuts (3).
2. Attach the license light stay (1) to the license plate
holder (4) with the two M5 x 16 pan head screws (5)
and two flange nuts (6).
3. Attach the license plate holder (4) to the license holder
stay (7) with the M8 x 20 bolts (8).
4. Connect the license light cables to the wire harness
cables with the 1-P coupler (9).
A When attaching the license light (2), apply the ground
(10) between the license plate holder (4) and the
flange nut (6) as shown below.
5. Attach the trailer electrical outlet (1) to the trailer
socket stay (5) with the pan head screw (2), nuts (3),
and spring washers (4).
ASSEMBLY INSTRUCTIONS
6. Attach the trailer electrical outlet (1) to the license plate
holder (4) with the M5 screws (2), M5 nuts (3) and
spring washers (4).
BAttaching the Steering Wheel
1. Attach the steering wheel (1) with one M12 nut (2) and
spring washer (3). The steering wheel should sit flat on
the steering column and be positioned as shown in the
photo.
2. Tightening torque for the M12 nut (2) should be 30 to
49 N-m (3.0 to 5.0 kgf-m).
3. Attach the pad (4).
11