Table of Contents
Advertisement
C385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008
Advisory tones
Your handset uses "advisory tones" to tell
you about different activities and statuses.
The following advisory tones can be acti-
vated and deactivated independently of
each other:
u
Advisory tones:
– Key click: every key press is con-
firmed.
– Confirmation tone (rising tone
sequence): at the end of an entry/
setting, when the handset is placed
in the base station and on arrival of
a new entry in the answer machine
list or the calls list.
– Error tone (descending tone
sequence): When you make an
incorrect entry.
– Menu end tone: When scrolling at
the end of a menu.
u
Battery low beep: the battery requires
charging.
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Activating/deactivating advisory tones
¢
Settings
§Menu§
¢
Advisory Tones
Setting the battery low beep
¢
Settings
§Menu§
¢
Battery Low
/
/
On
Off
During Call
¢
Audio Settings
Select and press
(‰ = on).
§OK§
¢
Audio Settings
Select and press
(‰ = on).
§OK§
The low-battery beep is acti-
vated or deactivated or sounds
during a call.
Restoring the handset to the
factory settings
You can reset any individual settings and
changes you have made. This will not
affect entries in the directory, calls list, or
the handset's registration to the base sta-
tion.
¢
¢
Settings
Handset
§Menu§
¢
Reset Handset
Confirm query with
§OK§
Ç
with
.
a
Press and hold (idle status).
Base station settings
The base station settings are carried out
using a registered handset.
Protecting against unauthorized
access
Protect the system settings of the base sta-
tion with a PIN known only to you. You
may have to enter the system PIN into the
base station when manually registering a
handset.
Changing the system PIN
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to you.
¢
¢
Settings
Base
§Menu§
~
Enter the old system PIN and
press
. For security, the PIN
§OK§
is shown as four asterisks
( **** ).
~
Enter your new system PIN
and press
§OK§
a
Press and hold (idle status).
Base station settings
, or reject it
¢
System PIN
.
43
Advertisement
Table of Contents
