Alfa Romeo Giulietta Uconnect 6.5" Radio Nav Manual page 33

Intersection
To enter a destination using an
intersection, press the "Intersection"
button in the main Navigation Menu.
The display will show the name of the
current Country and Town.
To change the Town and/or Country,
press the appropriate button on the
display and follow the procedure
indicated.
The following screen shows the basic
Country and Town setting.
You can use "Spell City" to enter and
then select the name of the town, then
enter the name of the street and the
intersection number.
You can use "Spell Street" to enter and
then select the name of the street
then enter the intersection number.
After entering the name of the town and
the number of the intersection
correctly, the navigation system will
request confirmation of the destination.
Press the "Yes" button to confirm and
begin navigation.
If you press the "Intersection" button
during navigation, the navigation
system will ask you to select one of the
following options: "Cancel previous
route", "Add as first destination" and
"Add as last destination".
Go Home
To enter your home address, proceed
as follows:
❒ press the "Go Home" button in the
main Navigation Menu: if no address
has been entered yet, press "Yes"
to do so;
❒ to select the address, choose one of
the following options: "Address",
"Recent", "Point of Interest",
"Favourites", "Intersection", "GEO
Coord", "Point on Map", "Town
Centre", "Closest Town", "Phone
Number";
❒ after entering the address, press the
"Save" button to save the
modifications and begin navigation.
The address entered will be stored and
it will be possible to recall it at any
time by pressing the "Go Home" button
in the main Navigation Menu.
Changing/Clearing home address
To change/clear your home address,
proceed as follows:
❒ press the "Go Home" button in the
main Navigation Menu;
❒ press the "Options" button on the
Map;
❒ press the "Clear Home" button then
select "Yes" to delete the address.
To enter a new address, proceed
according to the instructions above.
Trips
To navigate to a destination which is
already stored, press the "Trips" button
in the Main Navigation Menu.
Then press the button with the name of
the destination and finally select "Yes"
to begin navigation.
To add a new trip, proceed as follows:
❒ press the "Create new Trip" button;
❒ enter the name of the new
destination;
❒ select "Add Destination" to add the
new destination;
❒ to select the address, choose one of
the following options: "Address",
"Recent", "Point of Interest",
"Favourites", "Intersection", "GEO
Coord", "Point on Map", "Town
Centre", "Closest Town", "Phone
Number";
❒ if you wish to add other destinations,
proceed in the same way. Every
destination is added to a list;
To delete a destination from the list,
press the button.
31