Advertisement
Quick Links
The Liko SafetyVest is a sit-to-stand vest that is
unique in terms of safety, form and function.This vest
is designed to lift around the back and under the
arms. The inside is lined with a material that is inten-
ded to prevent the vest from sliding up on the body.
The waist belt, which is sewn to the vest, is a safety
feature that helps to avoid the risk of a patient sliding
out of the sit-to-stand vest.
You must use a combination of two loops on each
hook when attaching the sling to the lift.
The Liko SafetyVest is available in two models and
In this document, the person being lifted is referred to as the "patient" and the person helping them is referred to
as the "caregiver".
Caution triangles are used to warn of situations that demand extra care and attention.
Before using lifts and lifting accessories, read the instructions for both the sling and the lift that will
be used. Instruction guides can be downloaded, free of charge, at www.liko.com.
Mod. 93
Product Description
Liko SafetyVest, Mod. 93, 94
several different sizes. Model 94 is equipped with a
higher back to provide extra support for the back.
The Liko SafetyVest is mainly intended for use in
combination with the Sabina sit-to-stand lift with a
narrow slingbar (350-slingbar).
In combination with Sabina, the SafetyVest forms a
functional unit. For complete information and best
results, read the instruction guides for both products.
A complete understanding of the contents of these
instruction guides is essential, and the equipment
should only be used by staff who are fully informed.
Instruction Guide
Mod. 94
English
7EN160146-02
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Liko SafetyVest 94
Summary of Contents for Liko SafetyVest 94
-
Page 1: Product Description
Caution triangles are used to warn of situations that demand extra care and attention. Before using lifts and lifting accessories, read the instructions for both the sling and the lift that will be used. Instruction guides can be downloaded, free of charge, at www.liko.com. - Page 2 • Never leave a patient unattended during a lift/transfer. executed as safely and efficiently as possible. • Ensure that wheels on wheelchairs, beds, gurneys, • Although Liko slingbars are equipped with safety etc. are appropriately locked during the lift/transfer. hooks to prevent straps from accidentally unhooking,...
- Page 3 Attach and tighten the strap around the lower legs. Now you are ready to attach the loop straps and vest straps (which you have tested according to the above) to the slingbar. www.liko.com Liko SafetyVest • 7EN160146-02...
- Page 4 Thread the loop straps through both the inner and both outer strap guides before threading them through the metal D-rings. Hint! To further increase the width, the loop straps can be used together with Liko extension loops. w ww . liko .com...
- Page 5 Accessories for Liko SafetyVest Padding (for Mod. 93) The SafetyVest is equipped with a zipper, so that a padding of synthetic sheepskin can be added for a softer surface that distributes pressure more evenly. Loop clips This practical accessory is used to mark the loops that have been tried out for a certain person.
- Page 6 The product must be inspected at least once every 6 months. More frequent inspections might be required if the products are used or washed more often than normal. See Liko’s protocol Periodic Inspection for the respective product. The SafetyVest is intended for use only with Liko Sabina sit-to-stand lifts.
Need help?
Do you have a question about the SafetyVest 94 and is the answer not in the manual?
Questions and answers