Table of Contents
Advertisement
Quick Links
Issued 03/1999
Instruction Leaflet
1
A
A. (10BASE-T)
B. Fibre optic - ST Connector (10BASE-FL and FOIRL)
2
A
A. Twisted Pair (10BASE-T)
B. ThinNet-BNC (10BASE-2)
3
A
B
A. Segment Y 55m (165 ft)
B. Twisted Pair (10BASE-T)
4
A. Secure attachment of mounting
clips for wall mounting
Figures
B
TWISTED PAIR
TWISTED PAIR
COUL
COUL
Media Converter
B
TWISTED PAIR
TWISTED PAIR
COUL
COUL
Media Converter
C
TWISTED PAIR
TWISTED PAIR
COUL
COUL
TB14
Media Converter
D
C. Segment X 72m (216 ft)
D. ThinNet-B (10BASE-2)
A
Media Converters
Table of contents
1.0 Introduction __________________________________1
1.1
Inspecting The Packaging And The Product ______________1
1.2
Product Description ________________________________2
1.3
Features And Benefits ______________________________2
1.4
Applications For Tf14 (Fibre) And Tb14 (Bnc) ____________2
1.5
Full-Duplex Twisted-Pair To Fibre Applications ______________2
__________________________________2
2.1
Locating The Media Converter Unit ____________________2
2.2
2.3
Connecting Ethernet Media __________________________3
2.3.1 Connecting Twisted Pair (RJ-45) ______________________3
2.3.2 Connecting Fibre (ST) ______________________________3
2.3.3 Connecting ThinNet 10BASE2 (BNC) __________________3
3.0 Operation ____________________________________3
3.1
Power Requirements, Power Supply Types ______________3
3.2
Front Panel Leds __________________________________3
3.2.1 TF14 ____________________________________________3
3.2.2 TB14 ____________________________________________3
3.3
Bnc Port, Internal Termination Switch __________________3
3.4
Up-Link (Cross-Over) Switch On Rj-45 Port ______________4
3.5
Full And Half-Duplex Transparent Mode For Tf14 __________4
4.0 Troubleshooting ______________________________4
5.0 Technical Specification ________________________4
1.0 Introduction
This section describes the RS TF14, and RS TB14 Media Converters,
including features and typical applications.
1.1 Inspecting the Package and the Product
Inspect the contents of the package for any signs of damage and
ensure that the items listed below are included.
This package should contain:
1
RS Media Converter Unit
1
External Power Supply, 230 Vac 50Hz
1 set
Metal mounting clips and screws, 2 each
1
Velcro ® Tape section, approximately 3 inches in length
1
User Guide
V10829
RS Stock No.
Model TB-14 331-6780
Model TF-14 331-6774
________________2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RS TB-14 331-6780
Summary of Contents for RS TB-14 331-6780
- Page 1 Full and half-duplex transparent mode for TF14 __________4 B. ThinNet-BNC (10BASE-2) 4.0 Troubleshooting ______________________________4 5.0 Technical Specification ________________________4 1.0 Introduction This section describes the RS TF14, and RS TB14 Media Converters, including features and typical applications. 1.1 Inspecting the Package and the Product TWISTED PAIR TWISTED PAIR...
- Page 2 Each model is equipped with a full complement of LEDs to provide network traffic status and basic diagnostic information without additional network diagnostic equipment. Highly Reliable and Dependable RS Media Converters are based on a robust design and are packaged in a metal enclosure to ensure high reliability and durability.
- Page 3 V10829 3. Connect the Transmit (TX) port (light coloured post) on the Media Media Distance Formula for Media Converters Converter to the Receive (RX) port of the remote device. Begin with (see fig.3) the colour coded strand of this first TX-to-RX connection. X% + Y% <...
- Page 4 Operating Environment: RS Components shall not be liable for any liability or loss of any nature (howsoever Ambient Temperature: ____________32°F to 104°F (0°C to 40°C) caused and whether or not due to RS Components’ negligence) which may result Storage Temperature: ________________________-20°C to 60°C...
Need help?
Do you have a question about the TB-14 331-6780 and is the answer not in the manual?
Questions and answers