Advertisement
Available languages
Available languages
en
Operation
Operation
W Risk of injury from sharp blades /
rotating drive!
Do not attach or remove attachments until
the appliance is at a standstill. Never place
fingers in the attached blender. Never
operate the appliance without a completely
assembled blender or attached lid! When
the appliance has been switched off, the
blade continues running briefly.
Do not touch blender blade / cutting blade
with bare hands.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add maximum
amounts of hot or frothing liquid as
indicated in the respective tables.
Warning!
Never operate an empty blender. Always
work with a completely assembled
appliance. Screw the blender fully onto
the motor block. Place motor block on a
smooth, level and clean work surface.
Preparation
■ Before operating the appliance
and accessories for the first time,
clean thoroughly; see "Cleaning and
servicing".
■ Place motor block on a smooth, level
and clean work surface.
■ Unwind the cable to the required length.
Recommended operating speed
The values in brackets apply to appliances
with a 2-step rotary switch.
1 (1)
Pureeing fruit and vegetables
1 (1)
Making mayonnaise
3 (2)
Soups, smoothies
3 (2)
Raw fruit and vegetables
5 (2)
Cocktails, Milkshakes
Pulse
Ice cubes
Pulse
Very hard ingredients
Note: Appliances which feature programme
buttons (IceCrush, smoothie) can provide
the optimum speeds for processing ice
cubes and smoothies.
6
Plastic blender attachment
The blender is suitable for
– blending and frothing liquids,
– cutting and chopping raw fruit,
vegetables, nuts and chocolate,
– puréeing soups, cooked fruit and
vegetables,
– preparing mayonnaise and sauces.
Do not process deep-frozen ingredients
(except ice cubes).
The appliance is suitable for preparing the
following quantities:
Solid food
Liquids
W Hot or frothing liquids
X Fig. B
■ Insert blade holder into the blender jug
and lock by turning it to the left.
■ Attach blender jug to the drive on the
motor block (2 positions possible).
■ Attach blender jug by turning it all the
way clockwise. The coloured mark on
the blade holder must be visible in the
cutout on the motor unit!
■ Add ingredients.
■ Attach lid and lock by rotating it in a
clockwise direction. The cover can be
attached in 2 positions.
– with outlet opening forwards for pouring
out the blended ingredients
– with outlet opening backwards,
container closed
■ Insert measuring cup into feed tube and
turn it anti-clockwise.
■ Insert the mains plug.
■ Rotate the switch to the required setting.
■ Grip the edge of the lid while operating
the blender. Do not reach over the feed
tube or spout!
Add more ingredients:
■ Set the rotary switch to f. Wait until
the drive comes to a standstill.
Either
■ Remove lid.
■ Add more ingredients.
or
■ Take out measuring cup.
400 g
max. 1.5 l
max. 1.0 l
Advertisement
