Obdstar TP50 User Manual

Intelligent detection on tire pressure

Advertisement

Quick Links

TP50 User Manual
TP50 User Manual
Statement
This handbook is the manual of TP50. Without the written permission from
the manufacturer, any company or individual shall not copy or backup it in
any form (electronic, mechanical, photocopying, recording or otherwise).This
manual is only operating instructions for TP50. If any result caused by using it
on other equipment, the company does not assume any responsibility for it.
If not quality problems of TP50,such as equipment failure caused by user
abuse or misuse, unauthorized disassembly, repair equipment yourself, not
operate or maintain by the instructions, lose it, the repair will not be free.
Other product names mentioned in this manual are in order to describe how
to use TP50, and their copyrights are still observed by the original company.
TP50 and files are used for normal vehicles maintenance. If used for illegal
purposes, the company does not assume legal responsibility.
Note:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP50 and is the answer not in the manual?

Questions and answers

Summary of Contents for Obdstar TP50

  • Page 1 (electronic, mechanical, photocopying, recording or otherwise).This manual is only operating instructions for TP50. If any result caused by using it on other equipment, the company does not assume any responsibility for it.
  • Page 2 1.4.1.1 Activate tire pressure sensor……………………………………5 1.4.2 System Setting………………………………………………………………7 1.4.2.1 Language selection…………………………………………………7 1.4.2.2 Font setting…………………………………………………………8 1.4.2.3 Metric/Inch……………………………………………………………8 1.4.2.4 Data logging…………………………………………………………9 1.4.3 System information…………………………………………………………9 1.4.4 Device self-test………………………………………………………………10 Chapter 2: How to update software for TP50…………………………………………10 2.1 Update tool software installation………………………………………………10 2.2Register……………………………………………………………………………13 2.3 Software updating……………………………………………………………………14...
  • Page 3: Chapter 1 : Summary

    TP50 User Manual Chapter 1 : Summary 1.1.Features 1.1.1. Advantages ●Multi-language environment can be applied in different countries and regions. ●The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming. ●Updating via TF card at any moment.
  • Page 4: Introduction Of The Device

    TP50 User Manual 1.2 Introduction of the device 1.2.1 The main unit and accessories(Picture as below) Name Instruction Number Induction Coil Turn it towards the Tire Pressure Sensor ① ② TF card slot To keep diagnostic program or data ③...
  • Page 5: Hardware Technical Specification

    TP50 User Manual ⑨ Down Down ⑪ ⑩ Right To right ⑫ ⑬ ⑭ Keyboard input option key Start TPMS test ⑮ Test (with the Tire Pressure Sensor activated) ⑯ Display Screen Show information ⑰ USB Interface Connect with USB cable...
  • Page 6: Functions Setting

    TP50 User Manual 1.4 Functions setting Power on, and then press ENTER on the screen, then go to the function setting, setting information as shown below: 1.4.1 Function selection Select different functions according to different requirements. Note: Software numbers and functions are different according to different product configuration.
  • Page 7: Activate Tire Pressure Sensor

    TP50 User Manual 1.4.1.1 Activate tire pressure sensor Choose the test vehicle model, as below. Press UP/Down Button to choose Press OK Button to conform. Confirm the vehicle model, then operate as follow: 1) Press UP/Down and Left/Right Button to choose the tire you need, then press Test Button to activate the sensor.
  • Page 8 TP50 User Manual 2)Click 'OK' to enter All Wheels Test page 3)Press UP/Down and Left/Right Button to choose more function, then click 'OK' to enter, as below:...
  • Page 9: System Setting

    TP50 User Manual 1.4.2 System setting Select system setting, language and contrast can be adjusted, as shown below: 1.4.2.1 Language selection This device supports simplified Chinese, traditional Chinese, English, Russia, Greek, Spanish, Italian. In the language directory, select required language...
  • Page 10: Font Setting

    TP50 User Manual 1.4.2.2 Font setting According to requirement, select different font. 1.4.2.3 Metric/Inch According to different requirements, select the Metric/Inch by the up and down keys, and press ENTER to confirm as show below,...
  • Page 11: Data Logging

    TP50 User Manual 1.4.2.4 Data logging Any problems during testing, please use the Data Logging function to record the test process and send the data to us. Select ON by the up and down keys and press ENTER to confirm, shown as below, Note: Every time you need to select ON if you want to record the data before testing car.
  • Page 12: Device Self-Test

    Device self-test includes screen display, keyboard testing. hardware self- testing, etc. If it cannot show enough pictures on the screen, keyboard not work, and hardware self-test not get through, please return this TP50 to the manufacturer. Chapter 2: How to update software for TP50 2.1 Update tool software installation...
  • Page 13 TP50 User Manual Step 2: Click “Next Step 3: Wait for several minutes then the installation finished...
  • Page 14 TP50 User Manual Step 4: Click “Finish” After Update Tool installation completed, click the Update Tool software icon on desktop to start the update tools. The main interface is as shown below:...
  • Page 15: Register

    TP50 User Manual 2.2 Register Click “Sign up” to fill in user information. Username can be Chinese characters or the combination of alphabet and numbers. Serial number and register password can be referred to System information in the device.( Figure 1.4.3)...
  • Page 16: Software Updating

    TP50 User Manual 2.3 Software updating Operation steps as following: Step 1: Remove the TF card from your device. Insert your TF card into computer. Step 2:Open update tool and login Step 3: Click the source menu, choose the program you want to update, click it and confirm.

Table of Contents