Table of Contents
Advertisement
Embedian, Inc.
Chapter 5 Quick Start Guide
These quick start guides are intended to provide developers with simple
instructions on how to install SMARC T335X evaluation kit from very beginning
and have it monitoring your local device in few minutes. No advanced
installation options are discussed here - just the basics that will work for 95%
of users who want to get started. This guide will lead you through the process
of configuring, installing, and developing SMARC T335X. This guide was
written to be as clear as possible and to provide only the details necessary to
get you up and running.
chapters will be located where appropriate.
Step1. Plug a working SD card into SD slot
An image pre-installed SD card comes with the evaluation kit. Plug the SD
card into SD card slot (CN 16). If developers do not have evaluation kit,
please refer to Embedian "SMARC T335X Software Installation Guide" to
prepare for a working SD card first.
Step2. Check Jumpers and Switches
SW1 switch should be set as SD boot (OFF ON ON) and make sure that JP3
is not shunt.
SMART-BEE User's Manual Document Revision v.1.2
For more in-depth information, links to other
.
64
Advertisement
Table of Contents
