Icom RS-AP3 Instruction Manual page 16

2
USING THE RS-AP3
3. Starting the RS-AP3 (Continued)
5. Saving the access point setting data
Save the access point setting data as a setting file (extension: rsap3) on the PC.
• The last saved setting file automatically loads the next time you start the software.
We recommend that you do not move the setting file from where you saved it.
1
Click "File" and then "Save As..."
Clicking , or double-clicking
Click
q
2
When the "Save As..." window is displayed, set the desired file name, and then click
• The setting file (extension: rsap3) is saved in the selected location.
on the status bar, will also save the setting data.
Click
w
If necessary, change the
location.
1-11
[Save].
q
Click
w
Set