Before Pairing
Before pairing, please do the following on the phone.
1
Make sure that the Android operation system on your phone is version
4.3 or higher and supports Bluetooth.
To find out whether your phone supports Android Wear, visit
•
http://g.co/WearCheck from your phone.
If your phone is not Android 4.3 or later, please check with your
•
manufacturer for a possible software update.
2
Make sure your phone is next to your watch.
3
On your phone, download the Android Wear
Store
and install it. Check that the Android Wear
installed and updated to the latest version on your phone.
4
Make sure your phone is connected to mobile data or Wi-Fi. You will
need a data connection to set up your watch for the first time.
5
Keep the watch connected to power during setup.
NOTE
Your watch will turn on automatically while charging. Depending on the
•
software installed, your watch may automatically download and install an
update.
Depending on the network connection, the setup process might take over 20
•
minutes.
Connecting the Watch to a Mobile Device
app from the Play
app is
30