Download Print this page

Troubleshooting - Baby Brezza BRZ0098 Instructions

One step sterilizer dryer

Advertisement

Troubleshooting

Condition
Possible Cause
Unit is unplugged.
Appliance will
not start.
Unit is not turned on.
Insu cient water is in heater plate
area.
Scaling on
Mineral rich water used persistently.
water tank
heater plate.
Limited 1-Year Warranty
The limited warranty is valid only on products bought through authorized resellers and used
in Canada. Buying through an unauthorized reseller or using this product outside of Canada
automatically voids this warranty. This warranty is available to consumers only. You are a consum-
er if you own a Baby Brezza
®
Sterilizer Dryer that was purchased at retail for personal, family or
household use. Except as otherwise required under applicable law, this warranty is not available
to retailers or other commercial purchasers or owners. We warrant that your Baby Brezza
Sterilizer Dryer will be free of defects in material or workmanship under normal home use for one
year from the date of original purchase. Customer will be required to present original proof of
purchase in order to obtain the warranty benefits. In the event that you do not have proof of
purchase date, the purchase date for purposes of this warranty will be the date
of manufacture. If your Baby Brezza
the warranty period, we will repair it or, if we consider it necessary, replace it.
To obtain warranty services, please call Customer Service
at 1-800-667-8184 or write to: service@elfe.ca
ELFE JUVENILE PRODUCTS
SAINT-LAURENT (QC) H4R 2P2
service@elfe.ca www.elfe.com
5
Remedy
Make sure the plug is securely
inserted into the power outlet.
Press On/O switch before
choosing function.
Add 120ml water to heater plate
area.
Clean heater plate after each use
and use distilled water.
Sterilizer Dryer should prove to be defective within
®
DISTRIBUTED BY:
4500 THIMENS BLVD
1-800-667-8184
®
6

Advertisement

loading