Download Print this page

Baby Brezza BRZ0098 Instructions page 3

One step sterilizer dryer

Advertisement

Set-up and Use
Before placing items in the appliance for sterilization it is important that
all bottles, nipples and accessories are empty and that they are CLEAN
and FULLY RINSED in fresh water.
1. Place the appliance on a at surface where it is out of reach of children and
it will not be knocked or moved during operation.
2. Remove the lid and accessory rack from the sterilizer base.
3. Pour distilled water on the stainless steel heater surface to MAX line (120ml).
Never ll past MAX line.
4. Place the accessory rack on the base.
5. Place clean bottles with their opening facing downward on the lower posts
of the accessory rack. Place the bottle accessories (e.g. nipple, collar, cap, etc)
on the upper posts of accessory rack.
6. Place the lid on top of sterilizer base. Please ensure that the lid ts securely
on the base without any gaps where the lid and base meet.
7. Plug the appliance into the power outlet.
8. Press the
On/O button once. The LCD will display "00:00" and the
backlight will turn blue. Choose your desired function following the
instructions below. If there is no selection of function after pressing on/o
button, the appliance will automatically switch o .
Sterilize and Auto-Dry Function:
1. Choose the drying time (after steam sterilization): Press the
button one time for 45 minute dry time, two times for 60 minute dry time,
three times for 30 minute dry time. The sterilize/dry cycle will start 3 seconds
after the last button is pressed
2. When the sterilization cycle starts, the LCD will count up second-by-second
for the duration of the sterilization cycle.
3. When the sterilization cycle is complete, the appliance will beep, pause for
3 seconds and begin the drying cycle for the amount of time selected in
step 1. The timer on the LCD will count down second-by-second until it
reaches 00:00.
4. When the drying cycle is completed, the appliance will beep 5 times and
switch o automatically.
3
Sterilization only function:
1. Press the
the steam icon. The sterilization cycle will start 3 seconds after pressing
the sterilize button and the LCD will count up second-by-second for the
duration of the sterilization cycle.
2. When the sterilization cycle is complete, the appliance will beep 5 times
and switch o automatically.
Dryer only function:
1. Press the
45 minute dry time, three times for 60 minute dry time. The drying cycle
will start 3 seconds after the last button is pressed and the timer on the
LCD will count down second-by second until it reaches 00:00.
2. When the drying cycle is completed, the appliance will beep 5 times and
switch o automatically.
Caution: If it is necessary to remove water from the
base, always POUR AWAY FROM FAN OPENING.
Note water pour direction icon on base,
and pour in direction of arrow.
Cleaning
- Always unplug your product before cleaning.
- Do not immerse the base, the supply cord or the plug in water or other liquids.
- Do not clean base under water tap.
Sterilize/Dry
- Use a soft damp cloth to clean the base and control console.
- Never use abrasive pads to clean the plastic parts of the machine.
- The lid, accessory rack can be cleaned in hot soapy water.
- Mineral residue, particularly in hard water areas, may deposit on the stainless
steel heating plate after a few sterilization cycles. To avoid scale build up, wipe
the surfaces with a soft moist cloth after each operation.
- Deposits can be removed with proprietary scale removers or by leaving 30ml
water and vinegar solution (1 part vinegar to 4 parts water) on the heating
bowl for approximately 30 minutes. The bowl should then be wiped clean
with a clean, dry cloth. Some discoloration spots may remain after cleaning
with a vinegar solution, but these are harmless.
- Do not use abrasives or solvents for cleaning; they may damage the appliance
and the surface of the heating bowl.
- Dismantle the lter box and clean the lter once a month. Make sure the lter
is fully dried before placing back to the lter box.
Sterilize button one time, the LCD will display "00:00" and
Dry button one time for 30 minute dry time, two times for
4

Advertisement

loading