Page 1
November 1, 2017 Lit. No. 76756, Rev. 00 Walk-Behind Broadcast Spreader TS-85 & TS-85SS Owner's Manual and Installation Instructions Original Instructions CAUTION Read this document before operating or servicing the spreader. This document supersedes all editions with an earlier date.
Page 2
Lit. No. 76756, Rev. 00 November 1, 2017...
Page 3
TABLE OF CONTENTS PREFACE .................................. 5 Owner's Information ............................5 SAFETY ..................................7 LOADING .................................. 8 ASSEMBLY ................................9 CALIBRATION INFORMATION ..........................11 Lit. No. 76756, Rev. 00 November 1, 2017...
Page 4
Lit. No. 76756, Rev. 00 November 1, 2017...
PREFACE This manual has been prepared to acquaint you with When service is necessary, bring your walk-behind the safety information, operation, and maintenance spreader to your distributor. They know your spreader of your new walk-behind spreader. Please read this best and are interested in your complete satisfaction. manual carefully and follow all recommendations.
Page 6
Lit. No. 76756, Rev. 00 November 1, 2017...
NOTE: Indicates a situation or action that can lead 2-Digit Location Code to damage to your spreader and vehicle or other #### 4-Digit Sequential Number property. Other useful information can also be TS-85 Model Number described. TS-85SS Model Number Lit. No. 76756, Rev. 00 November 1, 2017...
Page 8
SAFETY SAFETY PRECAUTIONS NOTE: Lubricate grease fi ttings after each use. Use a good quality multipurpose grease. Improper installation and operation could cause personal injury and/or equipment and property PERSONAL SAFETY damage. Read and understand labels and this Owner's Manual before installing, operating, or making •...
LOADING LOADING YOUR SPREADER WARNING Never use wet materials, or materials with WARNING foreign debris with the spreader. The unit is designed to handle dry, clean, free-fl owing Do not overload spreader. Use chart below material. to calculate weight of material. Weights of material are an average for dry materials.
Page 10
ASSEMBLY 3. Insert rod into upper control handle as shown in ASSEMBLY INSTRUCTIONS Figure 2. WARNING 4. Insert rod end into gate linkage and lock in place Use safety glasses and gloves when infl ating with hairpin clip as shown in Figure 2. and installing the tires.
TrynEx International may require or recommend optional equipment for spreaders. TrynEx International offers a limited warranty for all spreaders and accessories. See separately printed page for this important information. The following are registered ( ) trademarks of Douglas Dynamics, LLC: TurfEx ® ®...
Need help?
Do you have a question about the TS-85SS and is the answer not in the manual?
Questions and answers