LG 42PM4M Owner's Manual page 37

External Control Device Setup
14. Balance (Command2:t)
G To adjust balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•
Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
* Balance : L50 ~ R50
15. Color Temperature (Command2:u)
G To adjust color temperature.
You can also adjust ACC in the Picture menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Normal 1: Cool 2: Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0: Cool 1: Normal 2: Warm
16. Abnomal state (Command : z)
G Abnormal State : Used to Read the power off status
when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
17. ISM mode(Command: j p)
G Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1H : Inversion
2H : Orbiter
3H : Orb.+Inv.
4H : White Wash
8H : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
36 Plasma Monitor
18. Auto Configure (Command2:u)
G To adjust picture position and minimize image shaking
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command2:c)
G To adjust Key code for IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to See page 39.
Acknowledgement
3: User
[c][ ][Set ID][ ][OK][Data][x]
3: Off
20. Tile Mode(Command : d d)
G Change a Tile Mode.
Transmission
[d][d][][Set ID][][Data][x]
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][][00][][OK/NG][Data][x]
automatically. Auto Configure only works in RGB-PC
mode.
Data Description
00 Tile mode is off.
12 1 x 2 mode(column x row)
13 1 x 3 mode
14 1 x 4 mode
...
44 4 x 4 mode
...