Page 1
SX225 SX235 Professional Power Amplifier SX ENG V1...
Page 2
F. TECHNICAL SPECIFICATIONS IMPORTANT SAFETY SYMBOLS MODEL CAUTION SX225 SX235 Item RISK OF ELECTRIC SHOCK DO NOT OPEN 4 Ohms 800W 2 1000W 2 Stereo mode (dual channel) 8 Ohms 450W 2 580W 2 The symbol is used to indicate that some hazardous live terminals are involved...
Page 3
E. BLOCK DIAGRAM Ventilation Do not block ventilation areas. Failure to do so could result in fire. Always install accordance with the manufacturer's instructions. Object and Liquid Entry Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety.
Page 4
A. INTRODUCTION How to connect bridge mode? Under bridge mode, signals that input from CH A, can be output from CH A+ and Thanks for purchasing our this series professional power amplifier. CH B+ or bridged output connector. Volume is controlled by volume knob of CH A. With many years amplifier R&D experience, the product adopts advanced professional In order to avoid crosstalk, please turn down CH B's volume to lowest.
Page 5
1. power switch(ON/OFF) How to connect parallel mode? Under parallel mode, signals that input to CH A or CH B, can be output from Power switch, is used for turning on/off amplifier power. When turn on apparatus CH A and CH B. Volume is controlled by volume knob of each channel. power, power indicator illuminates.
Page 6
How to connect stereo mode? 9. audio input/output connector Under stereo mode, CHA and CHB work separately, Signals that input from CHA, CHA and CHB electric balance COMBO (compliance XLR and 1/4"), terminal outputs from CHA; Signals that input from CHB, outputs from CHB. Volume is block input connectors, used for connecting external audio signal.
Page 7
13. audio output connector Output connector of standard speak-on and biding post connector, which is used Sleeve for outputting audio signal amplified to external speaker. in order to avoid damage of your device, please pay attention to impedance matching, don't make it is pay LF: 1+ 1- attention to impedance matching, don't make it is lower than lowest impedance.
Need help?
Do you have a question about the SX225 and is the answer not in the manual?
Questions and answers