Computer 1 - Dynamic R1 PRO Owner's Manual

21s fitness cycle
Table of Contents

Advertisement

COMPUTER CONSOLE
How to change battery﹕
1. Open battery cover and insert two AAA batteries.
2. Properly replace the back battery cover.
3. Under normal circumstances, the life of the battery is approximately one year.
4. If the LCD shows a partial display, please remove the batteries, wait for 15 seconds, and then
re-insert the batteries. Please Note: all setting will be lost once the batteries have been removed.
5. Please follow local safety guidelines for the disposal of batteries.
Function Keys﹕
ENTER:
1. Press the ENTER key to select the functions for setting exercise values for TIME
and DISTANCE.
2. Press the ENTER key to confirm the set exercise values.
3. Keep pressing the ENTER key for 2 seconds to remove all previous exercise
data.
UP:
1.Press the UP key to switch between the functions of speed, average speed,
maximum speed, heart rate, maximum heart rate, RPM, average RPM and
maximum RPM.
2. Press the UP key to add the setting exercise values of TIME and DISTANCE. The
minimum setting value of TIME is 5 minutes. Pressing one time will add 5
minutes, for example: 0, 10, 15, 20, .....
DOWN:
1. Press the DOWN key to switch between the SPEED
2. Press the DOWN key to decrease the setting exercise values of TIME and
UP+DOWN:
1. Press the UP key and the DOWN key at the same time for 3 seconds to start
2. Under the condition of setting exercise values, Press UP key and DOWN
CAL
PULSE.
DISTANCE. The minimum setting value of DISTANCE is 1 km or mile.
Pressing one time will decrease 1 km or mile, for example : 7, 6, 5, 4, 3, 2,
1...
the "AUTO SCAN" function.
key at the same time for 1 second to remove the values.
(computer console subject to change)
10
DISTANCE and

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R1 PRO and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents