Table of Contents
Advertisement
Page 11
Adjusting the Volume
Press the Volume Key repeatedly until you reach the desired volume level.
Resetting / Removing the Pairing
You may want to reset the headset to its original settings. This also clears all current
pairings.
1. Ensure the headset is OFF.
2. Press and hold the Volume Key 20 seconds until the Status Indicator alternately
flashes blue and red rapidly.
3. Release the Volume Key.
4. Press and hold the Volume Key again until you hear 2 beeps.
5. Recharge the headset for a few seconds
The headset is turned off and returns to the original settings. All current pairings are
cleared.
Advertisement
Table of Contents
