Regal Electro VALEN Installation And Operating Instructions Manual

2 volt gel batteries

Advertisement

Quick Links

TOPIN 6-12V BATTERIES
1300 734 253
sales@regalelectro.com.au
THANK YOU FOR MAKING IT A
www.regalelectro.com.au
A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VALEN and is the answer not in the manual?

Questions and answers

Summary of Contents for Regal Electro VALEN

  • Page 1 TOPIN 6-12V BATTERIES 1300 734 253 sales@regalelectro.com.au THANK YOU FOR MAKING IT A www.regalelectro.com.au...
  • Page 2 VALEN GEL 6-12V INSTRUCTION AND OPERATIONS MANUAL TABLE OF CONTENTS SECTION CONTENT PAGE SECTION CONTENT PAGE GENERAL INFORMATION Electrical Connections Battery Characteristics 5.4.1 Cabling Recommendations 5.4.2 Terminal Preparation SAFETY INFORMATION 5.4.3 Connector Installation General Information 5.4.4 Voltage Checks Sulphuric Acid 5.4.5...
  • Page 3: Safety Information

    2.2 Sulphuric Acid the battery is protected by insulating rubber mats. The VALEN 2V GEL Battery is a lead acid battery and CAUTION! Shorting a battery can cause serious injury, contains sulphuric acid in diluted form. Since the fire or explosion.
  • Page 4: Receipt Of Equipment

    For example, Do not store batteries outside, exposed to the elements. the VALEN 2V GEL Battery is designed for a 15 year float Store indoors in a cool, dry location. Do not store service life at 20°C.
  • Page 5: General

    VALEN 2V GEL module types are designed to be stacked 5.1.3.2 Ventilation and Gassing in the horizontal position. Modules are configured to...
  • Page 6: Installation

    VALEN GEL 6-12V INSTRUCTION AND OPERATIONS MANUAL truck. When all the modules have been lifted off the remaining modules. The modules must be bolted pallet unbolt the base support from the wooden pallet. together with 3 M10 bolts/module. When assembling...
  • Page 7: Temperature

    If the recalculated and measured string 5.4.3 Connector Installation voltages do not match reasonably well, contact REGAL The VALEN 2V GEL Batteries are supplied with intercell ELECTRO for further instructions. busbars or cables sized for the specified discharge time.
  • Page 8 The temperature they can efficiently accept. Greater than recommended correction factor (TCF) for VALEN 2V GEL Batteries is - maximum charge currents can result in excessive battery 0.003V/Cell/°C from a 20°C baseline temperature. This heating and gassing and a shortened battery life.
  • Page 9: Temperature Variation

    8.2.1 Installation Records SECTION 7 - STORAGE When the battery is received, record such things as: When installed VALEN 2V GEL Batteries will not be used Date of receipt (floated) for a period of time, the following procedure Condition of the modules...
  • Page 10 VALEN GEL 6-12V INSTRUCTION AND OPERATIONS MANUAL String voltage before performing a capacity test and is mandatory if the Float current battery is new or has not been on continuous float for at Ambient temperature least one week or if there is any questions about the Battery temperature battery’s state of charge.
  • Page 11 VALEN GEL 6-12V INSTRUCTION AND OPERATIONS MANUAL below the end-point voltage per cell times the number of 4. If a long duration test is being performed, the terminal cells in the string. to terminal voltage drop across the intercell connections For example: 1.75VPC x 24cells = 42.00V is the stop...
  • Page 12 TOPIN 6-12V BATTERIES SECTION 10 – BATTERY REPORT VALEN GEL 2V BATTERY REPORT Installed by: Representative: Operating Company: Date: Time: Battery Information Type of Battery: No. of Cells/String: String Float Voltage: Installation Date: No. of Strings/Battery: Battery Charge Current: Battery Code:...
  • Page 13 VALEN GEL 6-12V INSTRUCTION AND OPERATIONS MANUAL VALEN GEL 2V BATTERY MAINTENANCE REGISTER Date Maintenance Description 1300 734 253 sales@regalelectro.com.au THANK YOU FOR MAKING IT A www.regalelectro.com.au...

Table of Contents