After the receiver is connected, then the monitor shows “Find a new hardware” and the Rockfire USB driver is located and GameWizard appears in the Start Tray for your instant access game play.
Operation Reference RF Receiver Button A Button B Button D Hat Switch Trigger Button Button C Button E Twisted Rudder Button G RF Transmitter Throttle Button F 1. No Calibration Required. Upon the software installation completed, there is an exclusive driver for this joystick along with the software installed in your PC.
Page 5
Game Controllers or Joysticks) and select “Advanced “ page to check the name “Rockfire Cyber Knight” is in the “Controller 1” or not. Note when there is only one game controller connected to your PC, this joystick must absolutely be the “Controller 1”...
Page 6
. Any fluid leaks inside the joystick may cause unexpected damages. Visit Rockfire’s Web Site at http://www.rockfire.com.tw occasionally. The site contains the latest on Rockfire’s product line and useful technical support information, or drop us some line at e-mail: service@rockfire.com.tw...
Need help?
Do you have a question about the Cyber Knight RF-626u and is the answer not in the manual?
Questions and answers