Installing Memory Card - Nyx Mobile HIT User Manual

Installing memory card

Because the mobile space is limited, you may need to install a memory card (SD card).
To install the SD card:Aim the SD card card slot, forward to push the SD card into the card slot to install the
battery after the boot can be read to the SD card and use.
Take out the SD card: sliding backwards can take out the SD card.
Note: SD card is tiny. Please keep it away from children. Please select qualified SD cards, such as SANDISK,
V-DATA, and Transcend. Please match with the 4G LTE PHONE when you purchase the card.
Battery and charging
Installing the battery
Only use qualified battery and accessories. When the battery isn't used, put it in the protective case.
Note: Please operate according to the instructions to avoid damaging the battery contact.
Charging the battery
The new battery will reach its optimized performance after complete charging and discharging for several times.
Please charge in time when the battery voltage is low. Over discharging will damage the battery. Disconnect the
charger from the AC power supply and the 4G LTE PHONE after charging. While charging, the battery status
icon flashes from right to left, and stops flashing after charging. It is normal that the battery becomes warm in
the charging process.
Battery status
Your 4G LTE PHONE can monitor and display the battery status.
1> You can check the battery status from the icon in the upper right corner of the screen.
2> If the electricity is insufficient, the "Low Battery" prompt shows up. The 4G LTE PHONE sends warning
tone if the "System alert" in Profiles is activated.
3> During charging, the icon of battery status blinks until the charging completes.
Note: The actual standby time and call time depend on the operation, local network, and settings of the SIM
card and 4G LTE PHONE.
Using battery
The performance of the battery is affected by various factors, including wireless network settings, signal
intensity, environment temperature, the function or settings that you select, accessories and the mode of voice,
data or other applications that you select.
To keep the battery in optimum performance, please follow the rules below:
 The charging of new battery or batteries which haven't been used for long time may be longer;
 Keep the battery in room temperature when it is being charged;
7