Getting Started - Nyx Mobile HIT User Manual

Power key
Menu key
Back key
First call
1> Insert the SIM cards (switch off the phone at first). For detailed installation guide, please refer to "Installing
the SIM card".
2> Charge the battery. Refer to "Battery and charging".
3> Press and hold the Power key to switch on the 4G LTE PHONE.
4> Enter area code and telephone number in the dial interface and then press the call key to dial out by SIM1 or
SIM2 .
Note: Before using the 4G LTE PHONE, please insert valid SIM cards and charge the battery.
Installing SIM cards
When you register 4G LTE PHONE, You can apply for a telephone number card .
The SIM card saves the parameters required by the communication, and personal information, including PIN
code (personal identity number), contacts, short messages and other system services.
Warning: Do not bend or scratch the SIM card, or contact static, dust or water; if the SIM card is lost, please
contact your network operator. Please switch off the 4G LTE PHONE before installing the SIM card. The SIM
card is inserted into the rear side of the 4G LTE PHONE.
Note: The SIM card is tiny. Please keep it away from children to avoid swallowed. If the SIM card is invalid or
damaged, the phone displays "Insert SIM card". Switch off the phone and take out the SIM card, and then
re-insert it into the slot properly. If the SIM card is damaged, please contact your network operator. If the SIM
card is locked, please contact your network operator.
Press this key to lock screen;
Long press this key to select silent mode/airplane mode/switch off.
Long press this key to power on the phone when it is off.
Open menus in different interface.
Press this key to go back to last interface.

Getting started

6