Table of Contents
Advertisement
Screen Menu Options
Auto
Adjustment (RGB1 (PC) mode only)
Auto
Adjustment (RGB1 (PC) mode only)
- Automatically adjusts picture position and minimizes image shaking.
- Although the image is still not correct, your Monitor is functioning properly but needs further adjustment.
1. Press the AUTO CONFIG. button to run Auto configure.
• When
AUTO CONFIG.
• If the position of the image is still not correct, try Auto adjustment again.
2. If picture needs to be adjusted more after Auto adjustment in RGB1 mode, you can
manually adjust the image position and
Adjusting Horizontal/ V
Adjusting Horizontal/ V
- You can only adjust
V-POSITION/H-POSITION
1. Press the MENU button and then use
G
2. Press the
button and then use
3. Press the
G
button and then use
G
4. Press the
button and then use the
zontal or vertical position.
• The adjustment range of
• The adjustment range of
• Based on the PC resolution, the adjustment range of
change.
• Based on input signal, the position of the picture may not change even though you
have adjusted the horizontal or vertical position with this function.
5. Press the MENU button.
Picture Phase
Adjustments (RGB1 (PC) mode only)
Picture Phase
Adjustments (RGB1 (PC) mode only)
- If the picture isn't clear after auto adjustment and especially if characters are still jittery, adjust the picture phase
manually.
1. Press the MENU button and then use
2. Press the
G
button and then use
G
3. Press the
button and then use
G
4. Press the
button and then use the
• The adjustment range of
5. Press the MENU button.
Initializing (Reset to original factory value)
Initializing (Reset to original factory value)
- To initialize the adjusted value, select
18
has finished,
OK
will be shown on screen.
PHASE
.
ertical Position
ertical Position
in DTV (480p,720p,1080i), COMPONENT (480p,720p,1080i).
D / E
button to select the SCREEN menu.
D / E
button to select
button to select
D / E
F / G
button to adjust until you get desired hori-
is -50~+50.
V-POSITION
is -100~+100.
H-POSITION
D / E
button to select the SCREEN menu.
button to select
D / E
D / E
button to select
F / G
button to adjust phase.
PHASE
is 0 ~ 63.
RESET
with the
D / E
SCREEN ADJ.
.
or
V-POSITION
H-POSITION
V-POSITION/H-POSITION
may
.
SCREEN ADJ.
PHASE
.
button and then press the
SCREEN
SCREEN ADJ.
G
TO SET
VGA MODE
ARC
.
PIP/DW
ZOOM IN/OUT
SCREEN ADJ.
AUTO CONFIG.
G
0
V-POSITION
H-POSITION
PHASE
RESET
SCREEN ADJ.
AUTO CONFIG.
V-POSITION
H-POSITION
G
PHASE
30
RESET
G
button.
Advertisement
Table of Contents
