Related Manuals for Alpha Networks CS-3152C
Summary of Contents for Alpha Networks CS-3152C
-
Page 1: Network Camera
Product Name: CS-3152C: Wireless HD Day/Night Cloud Camera ; CS-3152: Wireless HD Day/Night Network Camera Model No. : CS-3152C, CS-3152 CS-3152/ CS-3152C Network Camera Quick Installation Guide... -
Page 2: Fcc Warning
Quick Installation Guide FCC Warning Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 3 Quick Installation Guide CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
-
Page 4: Before You Begin
Quick Installation Guide Before You Begin… System Requirements 10 Base-T Ethernet or 100 Base-TX Fast Ethernet CD-ROM or DVD-ROM drive CPU: Intel Pentium IV 2.0 GHz and above, or AMD Athlon 64 3000+ and above Memory: 512 MB or above VGA resolution:1024 x 768 or above Package Contents One SOHO Internet Camera... -
Page 5: Hardware Installation
Quick Installation Guide Hardware Installation Attach the Stand Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the camera’s rear panel, and then connect it to the network. Connect the Power Adapter Connect the external power adapter to the DC power input connector located on the camera’s rear panel, and then connect it to your wall outlet. - Page 6 LED indicators on the right side of the camera. Select the CS-3152/CS-3152C from the list and click the > symbol to begin configuration with the IPCam Wizard. 3. Type the administrator ID (user name) and Password to proceed to configure the camera.
- Page 7 Quick Installation Guide 4. This screen allows you to change the administrator password. To change the password carry out the following: Tick the Change Password checkbox Type a New Password Type it again to Confirm Password. Click the > symbol to proceed to the next IPCam Wizard menu screen.
- Page 8 Quick Installation Guide If you are choosing a Fixed IP network connection, proceed to Step 6b to configure Fixed IP network settings. If choosing DHCP, skip ahead to step 7. a. Type in the User Name for your PPPoE connection in the User Name field, the password in the Password field and confirm the password in the...
- Page 9 Quick Installation Guide a. Wireless setup requires entry of wireless settings including authentication method, encryption and key. 8. The following window appears, summarizing the network settings of your Camera: When you have finished setting up the Camera, click the > symbol to apply the new settings.
- Page 10 Quick Installation Guide 11. The camera is now ready to use. To launch your default browser and connect to the camera’s web manager and live video display, click the address of the camera in the center of the menu. 12. Type the administrator’s User Name (ID) and Password to access the camera’s user interface.
-
Page 11: Using The Ip Camera
Quick Installation Guide Using the IP camera Video Display Control Change display settings Click on the little screen icon to quickly switch among the preconfigured formats of the video, which correspond to the video settings profile. Four profiles can be configured using the Video and Audio Settings menu.
Need help?
Do you have a question about the CS-3152C and is the answer not in the manual?
Questions and answers