5.12.2 White List
You may need to white list an IP address if you want to connect the the server remotely. White list feature
is applicable only when the Cloud Link 4G Modem is in server mode to allow a configured client IP
addresses to connect to device.
This feature can be enabled by
1. Selecting Enable option for White List Enable
2. Allowing client IP addresses in white-listing configuration group.
Note:
Client IP addresses can either be PowerSpring or MasterLink PC's IP address.
Honeywell
2016
5 Configuring Cloud Link 4G Modem
5.12 Secure Sign On
65