Advertisement
11 | USING RKING940
Making a call:
•
Using device: In standby mode, dial the number on your device to make a call
•
Using voice dialing: In standby mode, press the On/Off button quickly. You will hear
a short tone from the headset, and your device will prompt you to say the voice tag
which you have already attached to your contact. If the voice tag is identified by the
device, the related number will be dialed. Please ensure that your device supports
this voice-dialing function, and the voice tags have been set up on your device prior to
attempting this. Refer to your device's user guide or contact your service provider.
NOTE: Voice dialing is available only for the first device, if two devices are connected.
•
Last number re-dialing: In standby mode, press the On/Off button twice. The last
number you dialed will be re-dialed.
NOTE: If two devices are connected with RKING940, hold the Volume (–) button for 2
seconds to dial the last number on the device connected previously.
13
Advertisement
